TunerPro User Forum

Hello. Tuners come here sometimes. Ask questions

About firmware using the example of BOSCH M3.1. Part 1. First, about identification. There are many identifiers for firmware and brains. For example, we have a brain with a bunch of stickers, on the block, on the memory chip (EPROM), with these numbers. BOSCH M3.1 0 261 200 405 1 267 356 548 1 735 6...

As far as I know the pump is turned on by turning the key to the start position. m3.3.1 does not have fuel pumping before starting like in ms40.1

Hi bro, very interesting, at first glance it is difficult to understand about maf. I read the forum from the phone. Is it possible to calibrate a 30 year old oem maf 413? taking into account the tuning camshafts. There is a strange behavior in my ECU: when the lambda mode is on, I start the warmed u...

I used to have chaos in my head and on my computer. There were files signed correctly and incorrectly. I sorted bins by checksum address, adding #7D32 to the name, for example. After that it became clear. I have many bins for different ecu. You have a good collection! Chip for $5) In my country they...

177 soft was sent to me by my friend, I'm sure it's the original. He told me that 177 was used for the 525i police. I've never used it, only looked through it. 609 soft several files, some from the Internet, some were also sent by a friend. I used 609 soft, vanos advanced at higher RPM and more cran...

I am glad to see progress in your work. I have 177 and 609 soft on my computer at home, but I am currently on a business trip, I will be able to send it in 2-3 months

That's some last information for 413/506: - Explanation for weird looking ignition dwell table - that's actually timing table for primary current switching on before desired ignition event, and same x*0.75 conversion works with it. So, simply, if you want to calculate new dwell table for different ...

I noticed different rpm axes for vanos activation in 623 and 715. At high RPM in 715 vanos stays advanced a bit longer

To make the injection later I need to increase the values, right?

Hi. Post some of this xdf so that people will believe you.

Write to me personally!

Write to me personally!

Buy a Chinese maf from Steelox. It works great, the car flies like an airplane)

As far as I know, there are two versions of the 402, respectively, and the addresses of the idling control cards are different. Send the *.bin file

Bosch 522?

As far as I know the address is 0x42DD, the value is 92=6500, 88=7200 rpm

Hi. It looks like the tables d5e6, d63a, d68c, d6ae represent the fuel injection phase. The values ​​for PT and WOT. The values ​​in the table are the intake camshaft rotation angle, the camshaft sensor signal is used. I got the idea to change these tables when I found out how one tuner was welding ...

Hello. I have been following the M3.3.1 motronic topic for a long time. My car is 525i 95 413red 623soft camshaft's 9.7/240+Ostrich2.0+wideboard sensor. But I have little experience in tuning, although in my city people say the opposite. This is the first post here, what else can be improved in bin?...