A9L bin file

NickHemmesch · Post by **NickHemmesch** » Fri Nov 24, 2006 9:35 am

Hi,

TunerPro RT seems to want a 64k A9L bin file to read it properly.

Where can I find the proper bin, or how can I load a 56K bin?

Thanks in advance . . .

Nick Hemmesch
nick@qmailtoaster.com

Post by **dex** » Fri Nov 24, 2006 3:48 pm

Two solutions to this

either

Use a hex editor to 'pad out' the first 8192 bytes with null data.

or

Edit the xdf header (cntl + F2) and change the bin size to 'E000', put a base offset of '2000' in and check the 'subtract' tick box.

NickHemmesch · Post by **NickHemmesch** » Fri Nov 24, 2006 6:49 pm

Hi Dex,

Thanks for the info. I will give it a try.

Regards,

Nick Hemmesch

NickHemmesch · Post by **NickHemmesch** » Mon Nov 27, 2006 4:55 pm

Hi Dex,

That worked fine. Thanks . . .

Nick Hemmesch

David Claflin · Post by **David Claflin** » Sun Aug 19, 2007 12:01 pm

dex wrote:Edit the xdf header (cntl + F2) and change the bin size to 'E000', put a base offset of '2000' in and check the 'subtract' tick box.

I tried this method and it didn't work for me. I lost all of the functions/scalars. I'll have to download an editor and see if I can make that work.

Edit> I'm officially a retard.

I tried the header edit before I loaded the bin. I tried afterwards and it seems to be OK. Thanks!!!

Post by **dex** » Sun Aug 19, 2007 1:30 pm

No worries, we all make mistakes when learning something new