Problem setting up tables in Tuner Pro RT...

[russelc]

Hi,
New here. I'm tuning a BMW bin. I was able to set up constants in the software just fine. But I'm having an issue with tables. The maps in this bin are 1x8 for idle, 1x16 for WOT and 12x12 for Part Throttle. When I set up the maps, the data is displayed as 00h. Im setting the labels to the RPM and Load values as they would appear. I see that the pointer is correct and the data is there in the bin from the editor.

Is there a bug I don't know about? Or somthing special about the labels that address the data?

Thanks,
RussC

[Mangus]

Hi Russel -

Sorry for the lack of reply. Can you send me details about your BMW (the source of your information for creating the XDF)? I'll go ahead and set a couple of tables up for you. If there is a problem, I'll discover it.

Mark

[russelc]

No need, I got it. It was sutle, but it was an error on my part. I didn't have the address range for bins set correctly, ie not at all Bob over at MAF Tuner Pro helped my out.

Thanks for the reply,
RussC

Hi Russel -

Sorry for the lack of reply. Can you send me details about your BMW (the source of your information for creating the XDF)? I'll go ahead and set a couple of tables up for you. If there is a problem, I'll discover it.

Mark

[Mangus]

Excellent!

Any chance I could get your end result when its complete?

[russelc]

What are you looking for, the .XDF?

I can get you that if you like?

RussC

Excellent!

Any chance I could get your end result when its complete?

[Mangus]

Yes, please. That and a bin to play with.

[russelc]

How do I send files? PM sent also

RussC

[Mangus]

via my email address (see previous post).