I am in the process of trying to tune a 90 Bronco II with a 2.9L, man trans with a C9B Bin. I am new to the Ford tuning scene, and have set up my Flash burn2, and Ostrich to do EEC-IV. I need a DEF file for my ECM, is there one avail, or do I need to pay someone to hack one out for me?
THX Mark, and DEX
Dex I am still trying to figure out how to set up Tuner pro to read the bin properly from a Ford EEC-IV. I have read some of the posts here and am starting to get it.
The GUFB strategy will not work because the C9B ecu uses a different strategy. In this instance it is a speed density strategy, so whilst some of the parameters will be the same quite a few will be different.
You can edit and alter non password protected xdf's.
Ok i was looking at the EEC program code list over at Ford Fuel Injection, though there aren't any year listings, the B9Z is from a Ranger/BroncoII with a 2.9L engine. It lists my C9B as a 2.8L, but it works, and came with the vehicle. Is there a XDF avail for the B9Z that you know of?
Thanks for all your help.
So if there is no XDF avail for my ECM do you think it would be possible to take another avail speed density XDF, use the hex editor, and a logger to figure out the parameters?