Does TPRT display Vortec cam retard & ignition timing? I need to set the cam retard on a 1994 C-1500.
I read somewhere that the STC (Set Timing Connector) was deleted in 96', but this 94' harness definitely doesn't have one. This motor is from a '95 we got it with the harness just to make sure we had all the sensors and it did have The STC.
Vortec 4.3L
Moderators: Mangus, robertisaar, dex
The set timing connector is just a connector in the reference wire from the disty to the PCM, so even if you dont have a connector just cut the wire (tan/black) set the timing and reconnect.
Displayed spark advance in tunerpro is actually just the spark advance it is adding on top of the disty setting (initial advance) it not total advance.
Displayed spark advance in tunerpro is actually just the spark advance it is adding on top of the disty setting (initial advance) it not total advance.
Dan- ASE certified-A1, A4, A5, A8
95 S10 ecsb, 350, 9.5:1, ported Vortec heads, Crane(.484/.512 272/284 112LSA), OBD2 L31 intake, Hooker LT's, 2.5"ORY, Flowmaster 40, 4L60E, 8.8 posi w/ 3.73's, WBO2, '7427 PCM running in PFI mode, $OD.
95 S10 ecsb, 350, 9.5:1, ported Vortec heads, Crane(.484/.512 272/284 112LSA), OBD2 L31 intake, Hooker LT's, 2.5"ORY, Flowmaster 40, 4L60E, 8.8 posi w/ 3.73's, WBO2, '7427 PCM running in PFI mode, $OD.
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI