http://forum.tunerpro.net/viewtopic.php?f=4&t=2986
or search for "OBDII Plug in help" if it breaks again.
This was the post I believe you were referring to.
Was going to give this some more effort and was reading up on it
Jp
Search found 218 matches
- Sat Jan 04, 2020 9:15 am
- Forum: General Tuning Discussion
- Topic: ELM327 ? HELP!!!!
- Replies: 4
- Views: 19717
- Mon May 15, 2017 12:03 pm
- Forum: General Motors
- Topic: How to force TCC to unlock when WOT
- Replies: 1
- Views: 5805
- Mon May 15, 2017 12:01 pm
- Forum: General Motors
- Topic: Data numbers bouncing
- Replies: 3
- Views: 8163
Have you tried these: a.) verify the number of items in the datastream (could overwrite itself) b.) add a delay after requesting the data so it does not repeat the request prior to receipt of all data items. c.) check for electrical noise in the vehicle, bad engine to chassis ground maybe. Usually I...
- Fri Feb 19, 2016 8:42 am
- Forum: Feature Suggestions
- Topic: File differences
- Replies: 2
- Views: 12068
- Wed Oct 28, 2015 5:02 pm
- Forum: General Tuning Discussion
- Topic: ELM327 ? HELP!!!!
- Replies: 4
- Views: 19717
- Wed Sep 02, 2015 8:21 am
- Forum: General Motors
- Topic: error codes
- Replies: 1
- Views: 6351
- Wed Sep 02, 2015 8:16 am
- Forum: TunerPro Discussion
- Topic: Connect/Disconnect commands
- Replies: 4
- Views: 11866
- Mon Jul 13, 2015 7:47 am
- Forum: Feature Suggestions
- Topic: Why not pictures for bits?
- Replies: 6
- Views: 19497
Why not pictures for bits?
Would it be possible to display a graphic for On/Off of a bit?
We could make some small Check Engine, Oil, water, symbols.
Maybe invert color for status
Just a thought.
Jp
We could make some small Check Engine, Oil, water, symbols.
Maybe invert color for status
Just a thought.
Jp
- Mon Jun 22, 2015 7:55 am
- Forum: General Motors
- Topic: Spark Advance Initial GM TPI
- Replies: 6
- Views: 15454
- Sun Jun 14, 2015 6:11 am
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
Updated plug in
Can you confirm if the ELM plug In was updated to use the 4 char.
Was looking to restart this again.
THX,
Jp
Was looking to restart this again.
THX,
Jp
- Sat May 10, 2014 3:18 pm
- Forum: Feature Suggestions
- Topic: Edit: Undo!
- Replies: 5
- Views: 17877
Could enable and look at the change log too. Keeps a record of your changes to a bin. I ALWAYS make a new version and tweak. Then the log reflects the current changes for the most part (or I use the compare to see) too easy for me too forget what was good/bad as I start changing lots of items during...
- Sat Mar 29, 2014 12:30 pm
- Forum: General Motors
- Topic: Anyone wanna help me tune out my high idle? Total Newbie
- Replies: 2
- Views: 7606
Could try reducing the Park position of the IAC. that may be setting a minimum starting point while warm running. do a IAC reset and reset your TPS as best as you can. You may have difficulty starting after the change due to added vacuum load when cranking due to less air. Tends to crank slower with...
- Sat Mar 22, 2014 11:46 am
- Forum: Feature Suggestions
- Topic: Filter for min/max values in History tables
- Replies: 4
- Views: 18268
Filters :)
As an expansion to this idea if it is considered for implementation. Have the filter value selectable as one of three types. a.) Numeric value (Integer or floating point) b.) Data item value (ex: Speed > xx.xx, selectable from ADX list) c.) Bit driven (ex: TCC = true, Selectable from ADX list) Abili...
- Thu Feb 06, 2014 7:57 am
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
- Sun Sep 01, 2013 4:32 pm
- Forum: General Motors
- Topic: IS COMMAND / CONTROL OF IAC VALVE POSSIBLE ?
- Replies: 3
- Views: 9049
- Sun Sep 01, 2013 4:22 pm
- Forum: TunerPro Discussion
- Topic: Connect/Disconnect commands
- Replies: 4
- Views: 11866
- Sun Aug 18, 2013 5:15 pm
- Forum: TunerPro Discussion
- Topic: Connect/Disconnect commands
- Replies: 4
- Views: 11866
Connect/Disconnect commands
Is there a way to Disconnect and reconnect using text command while implementing a custom tool routine? I'm using the NVSRAM module on a 730 and have scripts written to use a custom tool. The tool calls the the selected file which launches the Upload/Download commands properly but the operation halt...
- Wed Jun 05, 2013 4:25 pm
- Forum: Feature Suggestions
- Topic: Copying & Pasting axis values into History Tables in ADX
- Replies: 1
- Views: 12492
I've done this by creating a generic history table, then save. Open the ADX in a text editor (non formatting type like notepad) and copying and pasting the definition of the one I want to copy over the generic one that was just created. Be careful of the syntax and keep the generic name and ID code....
- Mon May 20, 2013 1:18 pm
- Forum: Feature Suggestions
- Topic: Bit logging
- Replies: 13
- Views: 32256
- Mon May 13, 2013 6:55 am
- Forum: Feature Suggestions
- Topic: Bit logging
- Replies: 13
- Views: 32256
Back from the dead :)
I never realized that graphing of a bit was now possible. Marks explaination here gave me the idea to try it and it works! http://forum.tunerpro.net/viewtopic.php?t=3174 Create a "Value" for "Lockup' as one example. Set the word to be the location in the datastream (In $8D = 0x36) set...
- Sun Mar 10, 2013 3:59 pm
- Forum: General Motors
- Topic: tuning out the smell of a bigger cam... tips on a $DA2?
- Replies: 7
- Views: 21212
Sorry I didn/t see your reply. Yes drop them by 50 mV to start with in all 3 constants. 8498 = 465=Idle O2 Rich/Lean Slow Zero Error Lower 8497= 500=Idle O2 Rich/Lean Slow Zero Error Upper 8496 = 500= Idle O2 Rich/Lean Threshold Fast These are the $8D locations with my current values. I need to twea...
- Sat Feb 16, 2013 5:34 am
- Forum: General Motors
- Topic: tuning out the smell of a bigger cam... tips on a $DA2?
- Replies: 7
- Views: 21212
I forgot to mention, Adjusting the VE tables will not work because the O2 constants (for idle) and the other o2 tables for part throttle operation will drive the fuel right back in. Changing the o2 values to run in the range you want is the only way in CL to do it. Open loop is always an option but ...
- Sat Feb 16, 2013 5:30 am
- Forum: General Motors
- Topic: tuning out the smell of a bigger cam... tips on a $DA2?
- Replies: 7
- Views: 21212
- Sat Feb 16, 2013 5:18 am
- Forum: TunerPro Discussion
- Topic: Simulation - Temporary xdf parameters
- Replies: 12
- Views: 23917
- Sat Jan 12, 2013 7:40 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
response conversion
I just thought of something... The Plug In doesn't convert Hex to ascii for the commands to the ELM, Does it convert Ascii to Hex on the response? I'm thinking TP is looking for the hex response to be fed in. My port monitor program is making the hex conversion in the printout so I started my late n...
- Sat Jan 12, 2013 7:21 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
Sure thing once I get it displaying better. I have been working on this the last couple of days and have made good progress getting data from the ELM Bluetooth device. I have it over 10 Hz but am not getting values to transfer to TP properly. The serial port monitor log shows good data coming back, ...
- Sat Jan 12, 2013 3:42 pm
- Forum: Report A Bug
- Topic: tuner pro download - version is wrong
- Replies: 4
- Views: 12348
- Wed Jan 09, 2013 5:31 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
Found the problem, It's ME again!
My bad.
I didn't check the "Process Data" box in the response!
All is good (or at least better)
I left the post as is so if someone else makes the same mistake they'll know what to do.
JP
- Wed Jan 09, 2013 5:09 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
HELP ! Possible Issue ?
Started over and am having some success. I now have over 60 PID data items defined (around 16 working well) but can't make the command association (in the "Values" dialog) list them all. The way I'm doing each PID a.) Transmit definition b.) response definition c.) macro definition (sequen...
- Thu Dec 27, 2012 4:19 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
- Fri Nov 30, 2012 1:57 pm
- Forum: TunerPro Discussion
- Topic: TunerPro RT5 battery voltage gauge
- Replies: 8
- Views: 15366
- Mon Oct 29, 2012 2:12 pm
- Forum: General Motors
- Topic: Need assistance, please help
- Replies: 2
- Views: 6992
- Mon Oct 29, 2012 1:42 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
- Mon Oct 15, 2012 3:08 pm
- Forum: TunerPro Discussion
- Topic: tunerpro settings
- Replies: 2
- Views: 6517
- Wed Sep 26, 2012 1:26 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
Headers?
Here is a sample of my data: 000001: ? 000002: 000003: >ATWS 000004: 000005: 000006: ELM327 v1.5 000007: 000008: >ATE0 000009: ATE0 000010: OK 000011: 000012: >ATL0 000013: OK 000014: 0000...
- Mon Sep 24, 2012 4:56 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
- Mon Sep 24, 2012 4:41 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
- Mon Sep 24, 2012 4:39 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
To clarify the question, I'm figuring to have the data come in as two 8 bit values. Using the packet offset as 0 (MSB) and 1 (LSB) for each of the two values. Then having the main (set to 16 bit) value calculate using linked values of A = MSB, B = LSB. I think that should work but am unsure of the s...
- Mon Sep 24, 2012 3:58 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
16 equations ???
I have a run time parameter that requires a conversion of :
(A*256)+B = Seconds
A = MSB, B = LSB
How can I split the 16 bit output to create this equation?
I'm thinking you have a way to do it and I'm being dense and not seeing it.
thanks,
Jp
(A*256)+B = Seconds
A = MSB, B = LSB
How can I split the 16 bit output to create this equation?
I'm thinking you have a way to do it and I'm being dense and not seeing it.
thanks,
Jp
- Wed Sep 19, 2012 1:29 pm
- Forum: General Motors
- Topic: IAC effecting start time
- Replies: 5
- Views: 13386
- Tue Sep 18, 2012 5:44 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
This is moving along, have the first 10 PIDs working (04-0D) Does take a lot of entry time to create. this file will be HUGE if all PIDs are entered. No way to copy/paste when doing it. I'm grouping them into sets of 10 so macros can be executed sequentially and if the speed becomes a problem some c...
- Sun Sep 16, 2012 7:36 am
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
- Fri Sep 14, 2012 1:53 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
- Fri Sep 14, 2012 1:43 pm
- Forum: TunerPro Discussion
- Topic: TPV5 BLM History table...
- Replies: 3
- Views: 8309
The values in the table will be based on how the definition file is setup. Each person who created it could do it differently. I don't know what file you are using so its difficult to answer that question. The BLM table I use for $8D has MAP (Kpa) from left to right, RPM from top to bottom and fills...
- Fri Sep 14, 2012 1:32 pm
- Forum: TunerPro Discussion
- Topic: Help! Can't save bin file!
- Replies: 8
- Views: 16100
- Thu Sep 13, 2012 5:31 pm
- Forum: TunerPro Discussion
- Topic: Help! Can't save bin file!
- Replies: 8
- Views: 16100
- Tue Sep 11, 2012 12:27 pm
- Forum: TunerPro Discussion
- Topic: Help! Can't save bin file!
- Replies: 8
- Views: 16100
- Mon Sep 10, 2012 12:56 pm
- Forum: TunerPro Discussion
- Topic: OBDII plug in help
- Replies: 31
- Views: 70030
OBDII plug in help
I've been working with the plug-in and got it to work on my 06' Pontiac. I'm having difficulty understanding the definition of the PID request. To obtain the data sample with an ELM327 interface I've seen that all it takes is 0x01 (mode 1) and 0x01 (01 PID identifier for current RPM) I'm confused th...
- Mon Sep 10, 2012 12:49 pm
- Forum: TunerPro Discussion
- Topic: mark time/position in log file, during recording?
- Replies: 1
- Views: 5681
- Mon Sep 03, 2012 5:02 am
- Forum: Feature Suggestions
- Topic: Sideways gauges?
- Replies: 2
- Views: 10391