1994 GMC K1500 datastream Info Needed
Moderators: robertisaar, dex
1994 GMC K1500 datastream Info Needed
1994 GMC K1500 4x4 ext cab
350 tbi
Auto - 4L60E
16196395 < PCM
BJLH << Bin
I am trying to find the 'Slip' information in the datastream for the transmission. Viewing the datastream for message 0 works fine using the $0D mask files, but i do not see any slip information. I have started to log message 1 and have figured out a few things from it, but am not seeing a slip value thus far. I am assuming each message shows different diagnostic info, as in message0 seems to show engine data, thus was hoping to find transmission data on message 1. Is there a list of what is in each message? Does someone have a breakdown of the different messages for this particular setup.
Gizmo
350 tbi
Auto - 4L60E
16196395 < PCM
BJLH << Bin
I am trying to find the 'Slip' information in the datastream for the transmission. Viewing the datastream for message 0 works fine using the $0D mask files, but i do not see any slip information. I have started to log message 1 and have figured out a few things from it, but am not seeing a slip value thus far. I am assuming each message shows different diagnostic info, as in message0 seems to show engine data, thus was hoping to find transmission data on message 1. Is there a list of what is in each message? Does someone have a breakdown of the different messages for this particular setup.
Gizmo
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
moatesuser
moatespassword
if it asks...
http://www.moates.net/files/4)%20Datastream%20Definitions/ALDLstuff.zip
(you'll have to copy/paste the link, clicking alone will lead to a 404 error)
look at A218.DS, that will show you the tranny information you're looking for. bytes 46 and 47 of the first datastream.
this information should already be in an ADS or ADX though...
moatespassword
if it asks...
http://www.moates.net/files/4)%20Datastream%20Definitions/ALDLstuff.zip
(you'll have to copy/paste the link, clicking alone will lead to a 404 error)
look at A218.DS, that will show you the tranny information you're looking for. bytes 46 and 47 of the first datastream.
this information should already be in an ADS or ADX though...
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
ok, that's about what i expected... so is it a dual-byte value as implyed by the DS?if it's a single byte, that's VERY easy to setup, just make a lookup table and just throw in 4 values, the highest positive, lowest positive, lowest negative, highest negative...
i did the very same thing for an ABS definition i made the other day. since TP intterpolates the values, you only need to enter those four. possibly the 0 value, but still.
a 16-bit would work the same, just on a much larger scale.
i did the very same thing for an ABS definition i made the other day. since TP intterpolates the values, you only need to enter those four. possibly the 0 value, but still.
a 16-bit would work the same, just on a much larger scale.
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
http://tunerpro.net/
scroll down a bit, and you'll see this link.
http://tunerpro.net/beta/tpbeta.htm
scroll down a bit, and you'll see this link.
http://tunerpro.net/beta/tpbeta.htm
Thanks, I'll have to give that a try as ive noticed some other errors ive had with v4. I hope all this work building an ads file for a218 imports to v5. Or is there one for v5 around? I'll have to test out v5 on my laptop first before making the jump, as its win2k p366, anything I have bigger doesnt have a serial port on it.
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
you can import the ADS into V5, but you'll have to set all of the values and bits to the correct command response since that doesn't seem to transfer over...
also: the cheapest serial-usb adapter that works: parallax 28031, it's what i use for mine, i couldn't stand ancient laptops just because they had serial ports...
also: the cheapest serial-usb adapter that works: parallax 28031, it's what i use for mine, i couldn't stand ancient laptops just because they had serial ports...
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI