TunerPro User Forum

New TunerPro bin calibration file (XDF) for VAG group with engine control unit Magneti Marelli IAW 4MV.

Supported cars:
Audi A2 1.4L 16V
Seat Arosa 1.4L 16V
Seat Cordoba 1.4L 16V
Seat Ibiza 1.4L 16V
Seat Leon 1.6L 16V
Seat Toledo 1.6L 16V
Skoda Fabia 1.4L 16V
Volkswagen Bora 1.6L 16V
Volkswagen Golf 1.6L 16V
Volkswagen Jetta 1.6L 16V
Volkswagen Lupo 1.4L 16V
Volkswagen Polo 1.4L 16V

Available maps:
- Fuel: base lambda target, cold base lambda table, base lambda at full load.
- Ignition: basic advance angle map, advance angle map at full load, optimal advance angle map, spark advance angle correction by temperature.
- Air Control: volumetric efficiency, volumetric efficiency correction by temperature, maximum air filling.
- Idle: idle engine speed by temperature.
- Torque: max torque, requested torque.
- RPM Limiter.

Price 35 euro
Post: https://oldskulltuning.com/vag-skoda-se ... erpro-xdf/

Hello,
I have a VW Polo 1.4 16V 75HP and the ECU reference is not IAW 4MV but IAW 4TV.

Do you have an XDF file for this ECU? or does the IAW 4MV XDF file fits?

Thanks for your feedback

Regards

Bruno-

Hi there,
please send us your binary file via email so we can check it.

info@oldskulltuning.com

thank you