Page 1 of 1
shindengen ECUs
Posted: Fri Aug 02, 2019 12:22 am
by aphichart
how to hack shindengen ECUs
Re: shindengen ECUs
Posted: Tue Aug 06, 2019 12:25 pm
by decipha
first you will need hardware to interface the ecu and read out the stock binary
once you've read it out you will then need to find a disassembler for that ecu processor in order to read the code
you will then have to go through the code and figure out the algorithms in order to create a definition file for it
here is a brief description of the process for fords, same applies for all ecu's
http://www.efidynotuning.com/dis.htm
Re: shindengen ECUs
Posted: Fri Nov 15, 2019 2:54 am
by fangia
this is hảdware , use mcu upd 70d3577 /FG4
Re: shindengen ECUs
Posted: Sat Nov 16, 2019 8:09 am
by fangia
peter 62 ,, i sent messenger to u ,,inbox
Re: shindengen ECUs
Posted: Fri Jan 31, 2020 5:01 am
by Andre Chee
I have finish read this bin file
Re: shindengen ECUs
Posted: Mon Nov 02, 2020 12:23 am
by trongzen
Can anyone show me which device to use to read this ecu shindengen bin file. Thank you so much
Re: shindengen ECUs
Posted: Tue Jun 08, 2021 11:11 am
by Satria12
Andre Chee wrote: ↑Fri Jan 31, 2020 5:01 am
I have finish read this bin file
How to read ecu from backdoor pin? Do you have diagram circuit pin?
Re: shindengen ECUs
Posted: Tue Jun 08, 2021 11:13 am
by Satria12
peter62 wrote: ↑Fri Nov 15, 2019 5:38 pm
backdoor or via front pin??please email
thanks
Can you help me, show your diagram circuit pin to obd via backdoor? Can uou send email? Thnkyu
Re: shindengen ECUs
Posted: Mon Aug 09, 2021 4:35 am
by Cokie cokie
Satria12 wrote: ↑Tue Jun 08, 2021 11:11 am
Andre Chee wrote: ↑Fri Jan 31, 2020 5:01 am
I have finish read this bin file
How to read ecu from backdoor pin? Do you have diagram circuit pin?
hubungi saya di
Osatriadi@gmail.com untuk shindengen
Re: shindengen ECUs
Posted: Mon Mar 27, 2023 6:31 pm
by fangia
decipha wrote: ↑Tue Aug 06, 2019 12:25 pm
first you will need hardware to interface the ecu and read out the stock binary
once you've read it out you will then need to find a disassembler for that ecu processor in order to read the code
you will then have to go through the code and figure out the algorithms in order to create a definition file for it
here is a brief description of the process for fords, same applies for all ecu's
http://www.efidynotuning.com/dis.htm
Now, can write via k-line