I'm having a problem datalogging . I have to click on connect several times and then after a few minutes with the car running I start getting Packet error counts that just continue to rise, it acts like it would if you cut the key off or unpluged the aldl connector. I have checked the wires from the aldl plug back to the ecm and everything checks out fine.I'm running the 165 ecm with 6E. If anyone has any ideas I would love to hear them.
Thanks
Dewayne
datalog problem
Moderators: Mangus, robertisaar, dex
-
- Posts: 11
- Joined: Sat Oct 09, 2004 5:49 am
- Location: Braxton Mississippi
datalog problem
1989 Camaro Rs, 383 HSR, 280/288 XFI roller cam, T-5, 3.73 gears, 130 shot
Its not unusual to require a few connection attempts to hook up to a 165. The issue where the connection is lost is also relatively common. Every scanner I've ever used does it. I think its an issue with the 165 itself.
The 4.0 beta makes it much easier to connect (you generally only need to press connect once).
The 4.0 beta makes it much easier to connect (you generally only need to press connect once).
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am
-
- Posts: 11
- Joined: Sat Oct 09, 2004 5:49 am
- Location: Braxton Mississippi
Thanks Mark! I have also notice that if I try to connect with Win ALDL I only get 5 or 6 readouts and that the box in the middle of the top where if i remember correctly used to be "25" now flashes red with a "6".
Do you thing a fresh ecm might help?
Thanks again
Dewayne
Do you thing a fresh ecm might help?
Thanks again
Dewayne
1989 Camaro Rs, 383 HSR, 280/288 XFI roller cam, T-5, 3.73 gears, 130 shot