Copy XDF Parameters
Moderators: Mangus, robertisaar, dex
Copy XDF Parameters
I'm spending a fair bit of time trying to update various Australian XDF's that have data offset within the different Variants of the XDF. Would be nice to be able to copy a parameter from one xdf to another, ie open new instance of TunerPro so 2 are running, add new XDF Table for example to one xdf, copy and paste into the other instance of TunerPro, update the address offset and done.
At the moment I'm having to create the table in multiple versions, and enter all the data again with the only difference being the data location.
Have tried editing the xdf by hand, but this isn't ideal either, as one small error can make it junk.
Keep up the good work,
yoda69
At the moment I'm having to create the table in multiple versions, and enter all the data again with the only difference being the data location.
Have tried editing the xdf by hand, but this isn't ideal either, as one small error can make it junk.
Keep up the good work,
yoda69
Thanks Mangus, works a charm.
Would there be any possibility of being able to select multiple xdf items and copy in 1 go. Was just copying some DTC flags between xdf's and had to go back an forward about 30 times.
Having said that, it's still way quicker than what I was doing in the past.
Thanks,
yoda69
Would there be any possibility of being able to select multiple xdf items and copy in 1 go. Was just copying some DTC flags between xdf's and had to go back an forward about 30 times.
Having said that, it's still way quicker than what I was doing in the past.
Thanks,
yoda69
- Six_Shooter
- Posts: 590
- Joined: Sun May 06, 2007 7:32 am
This is a great feature I use frequently.
Thanks,
Dave
Thanks,
Dave
NismotronicSA Tuning Package/Powered by TunerCodeSA
Speed-Density Tuning for Nissans
Speed-Density Tuning for Nissans
Am I missing something or how do you open multiple instances?
When launching the second one, it always says that TunerPro RT is already running.
However, it is possible to launch two instances... patch the check:
Search for:
1C 00 75 44 6A 30
Replace with:
1C 00 EB 44 6A 30
And then you can open as many instances as you like. Also copying works between instances.
Mangus, could you make a checkbox option for this?
When launching the second one, it always says that TunerPro RT is already running.
However, it is possible to launch two instances... patch the check:
Search for:
1C 00 75 44 6A 30
Replace with:
1C 00 EB 44 6A 30
And then you can open as many instances as you like. Also copying works between instances.
Mangus, could you make a checkbox option for this?
You can pass -multiinstance as a command line parameter.prj wrote:Am I missing something or how do you open multiple instances?
When launching the second one, it always says that TunerPro RT is already running.
However, it is possible to launch two instances... patch the check:
Search for:
1C 00 75 44 6A 30
Replace with:
1C 00 EB 44 6A 30
And then you can open as many instances as you like. Also copying works between instances.
Mangus, could you make a checkbox option for this?
Dave
NismotronicSA Tuning Package/Powered by TunerCodeSA
Speed-Density Tuning for Nissans
Speed-Density Tuning for Nissans