Need help! crazy 3d map
Moderators: Mangus, robertisaar, dex
-
- Posts: 4
- Joined: Fri Apr 10, 2009 1:15 am
Need help! crazy 3d map
Any one knows what is wrong?
I use version 4.14 , with moates APU1 AutoProm , and this is hapend when i put a chip in the autoprom and download the info too tunerpro, i have triied different chips and no success.
anyone knows what is the problem??
I use version 4.14 , with moates APU1 AutoProm , and this is hapend when i put a chip in the autoprom and download the info too tunerpro, i have triied different chips and no success.
anyone knows what is the problem??
-
- Author of Defs
- Posts: 962
- Joined: Sat Feb 21, 2009 3:18 pm
- Location: Camden, MI
- Six_Shooter
- Posts: 590
- Joined: Sun May 06, 2007 7:32 am
-
- Posts: 4
- Joined: Fri Apr 10, 2009 1:15 am
-
- Posts: 4
- Joined: Fri Apr 10, 2009 1:15 am
yes i pretty sure , but if you or any one could e-mail me postmaster@voldenracing.no a working bin and XDF, of any car , so that i could try it.Mangus wrote:Are you sure that the bin is valid (that it was read properly), and that the XDF is the proper XDF for the bin?
?
thanks
kenneth
There are matching XDF and BINs installed with the software - 6E.xdf and arap.bin (or apyp.bin).voldenracing wrote:yes i pretty sure , but if you or any one could e-mail me postmaster@voldenracing.no a working bin and XDF, of any car , so that i could try it.Mangus wrote:Are you sure that the bin is valid (that it was read properly), and that the XDF is the proper XDF for the bin?
?
thanks
kenneth
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am
-
- Posts: 4
- Joined: Fri Apr 10, 2009 1:15 am
Ok, I guess I'm going jump in here and say that I've also been completely un-successful in downloading a bin from my ostrich2.. My bin is 32k, and I can load and use all 8 spots on it, but trying to read the bins back from it never works.
Whatever I'm getting back from the ostrich does not match anything on my original bin at all, and if I'm loading all 8 spots something on the dump should match my original bin somewhere. I've always assumed that since there was no existing XDF for my bin, it was my own screw-up. Now I'm starting to wonder.
I guess that if someone can point me to a known good matching bin/xdf from something else, I'll load that on my ostrich and see if it dumps right.
(edit.. saw the post above, I'll have a try this weekend and let you know)
Whatever I'm getting back from the ostrich does not match anything on my original bin at all, and if I'm loading all 8 spots something on the dump should match my original bin somewhere. I've always assumed that since there was no existing XDF for my bin, it was my own screw-up. Now I'm starting to wonder.
I guess that if someone can point me to a known good matching bin/xdf from something else, I'll load that on my ostrich and see if it dumps right.
(edit.. saw the post above, I'll have a try this weekend and let you know)