The last few days I've noticed that opening 2D tables will sometimes flash up real quick (in the work space), but then not show. clicking on the xdf item again may get a quick flash again, sometimes not.
3D tables are uneffected.
This only happens after looking through several tables, 2D and 3D.
I just checked again, and everything BUT the 3D tables are effected, constants/scalers will do the quick flash, along with the flags.
Closing and reopening TP RT seems to remove the problem, for a while.
I'm using code59, with the code59 1.3 xdf.
TPRT is build 381
2D tables
Moderators: Mangus, robertisaar, dex
- Six_Shooter
- Posts: 590
- Joined: Sun May 06, 2007 7:32 am
- Six_Shooter
- Posts: 590
- Joined: Sun May 06, 2007 7:32 am
I haven't had it happen lately, but I also haven't been using TP RT as often as I was last fall.Mangus wrote:Sorry I missed this one. Are you still experiencing this? If so, email me the repro steps and I"ll make sure it's not an issue in v5.
I'll see if I can make this happen again, and try to reproduce it.
- Six_Shooter
- Posts: 590
- Joined: Sun May 06, 2007 7:32 am
No.Mangus wrote:Are you using another product?Six_Shooter wrote:but I also haven't been using TP RT as often as I was last fall.
It's winter, or at least has been. For me that means a few feet of snow on thr ground and cold, cold weather, which I've had my fill of for this winter and can go away anytime time now.
I just haven't been tuning since my car is in the garage for the winter and currently taken apart, and my friends vehicles are living the same life. I have been checking things here and there with TP RT over the winter but haven't had this issue pop up since I started and first updated this thread.
I can't find anything else that does was TP RT does, so you don't need to worry about me using anything else Mark.
-
- Posts: 24
- Joined: Thu Oct 02, 2008 8:22 pm