NEW BMW 506 xdf
Moderators: robertisaar, dex
NEW BMW 506 xdf
I just sent a updated xdf for the BMW 506 chip number 965
This has many updates from the one that is in the download section.
It has the launch control/2 step rev limiter, corrected the scalars for the speed limiter, found the table for the IAC (idle air control), found the tables for Closed loop ( what engine load and rpm it is enabled and disabled) just to name a few. I set up levels in the xdf so to see everything you need to make sure the tab on the top of tunerpro all the to the right is set to all levels. I also have found how to turn off the CEL on the dash for any codes,but have not found out how to disable the codes altogether. This is not included in the new xdf. If anyone has any info on how this is done please email me. If anyone needs a CEL light turned off you can email me your bin file. I have been getting a lot of questions about tuning for larger injectors and tuning for E85. So I wrote up some info about how to do this. I think I may just post it up here.
I also sent a updated xdf for the 413 red label also. Not many changes to it. I always suggest updating to the 506 bin if you can.
Also please make sure the xdf you are using matches the bin file. You can always find the bin file number under ''BMW chip number" This is the most common issue I hear.
This has many updates from the one that is in the download section.
It has the launch control/2 step rev limiter, corrected the scalars for the speed limiter, found the table for the IAC (idle air control), found the tables for Closed loop ( what engine load and rpm it is enabled and disabled) just to name a few. I set up levels in the xdf so to see everything you need to make sure the tab on the top of tunerpro all the to the right is set to all levels. I also have found how to turn off the CEL on the dash for any codes,but have not found out how to disable the codes altogether. This is not included in the new xdf. If anyone has any info on how this is done please email me. If anyone needs a CEL light turned off you can email me your bin file. I have been getting a lot of questions about tuning for larger injectors and tuning for E85. So I wrote up some info about how to do this. I think I may just post it up here.
I also sent a updated xdf for the 413 red label also. Not many changes to it. I always suggest updating to the 506 bin if you can.
Also please make sure the xdf you are using matches the bin file. You can always find the bin file number under ''BMW chip number" This is the most common issue I hear.
-
- Posts: 28
- Joined: Fri May 06, 2011 7:11 am
-
- Posts: 28
- Joined: Fri May 06, 2011 7:11 am
Evilm3666 can you please email me your updated xdf for the 506 chip 965. Send to: brian_shor@yahoo.com
Thanks
Thanks
-
- Posts: 28
- Joined: Fri May 06, 2011 7:11 am
Any chance you could shoot me one as well? - Clint@turninconcepts.com
Re: NEW BMW 506 xdf
Kindly send me the latest/most complete 506 xdf to - jodyvermeulen007@gmail.com. Thank you in advance
Re: NEW BMW 506 xdf
can you please send me the newest 506 xdf sbtoonz@gmail.com
-
- Posts: 1
- Joined: Mon Apr 26, 2021 1:43 pm
Re: NEW BMW 506 xdf
Kindly send me the latest/most complete 506 xdf to Blondboy-emil@hotmail.com Thank you in advance
Re: NEW BMW 506 xdf
Can you shoot me one as well? thanks in advance. bomj911@hotmail.com
-
- Posts: 1
- Joined: Thu Aug 26, 2021 7:52 am
Re: NEW BMW 506 xdf
Can you send me 413 and 506 updated xdf´s? ioannis.h@gmail.com
Re: NEW BMW 506 xdf
hello
plz can you send me xdfs and tuned bins for 413 , 402 , 403 , 405 , 406 , 179 dme .... tonynassar89tn.tn@gmail.com
plz can you send me xdfs and tuned bins for 413 , 402 , 403 , 405 , 406 , 179 dme .... tonynassar89tn.tn@gmail.com
Re: NEW BMW 506 xdf
Please send me xdf 506 and 413 . If you have 075xdf m3 euro. Please send at noroc.alex@yahoo.it
Re: NEW BMW 506 xdf
can you please send me XDF files for 405 brains saibex87@gmail.com
Re: NEW BMW 506 xdf
hi can i please have updated xdf for the 965 chip brycedow2349@gmail.com
thankyou
thankyou
Re: NEW BMW 506 xdf
share the updated 506 file with me. Here is my mail antosevkolia@gmail.com thanks in advance.
Re: NEW BMW 506 xdf
The 506 xdf is updated on the tunerpro website. If there's a specific table that you need let me know and ill help as much as i can
Best regards
Adham al khechen
REVUP TUNING
Lebanon
Best regards
Adham al khechen
REVUP TUNING
Lebanon
Re: NEW BMW 506 xdf
Hey, can someone send me evil's 506 bin and xdf? I want to use it for my red label 413.
I need every possible table, inclusive knock parameters.
Thank You
I need every possible table, inclusive knock parameters.
Thank You
Re: NEW BMW 506 xdf
US M3 = silver label.
Red label = M50B25TU. Maps sometimes different. Basemaps you can find easily in M50B25TU by your own.
Red label = M50B25TU. Maps sometimes different. Basemaps you can find easily in M50B25TU by your own.
Re: NEW BMW 506 xdf
Hi, I couldn't find this definition in the TunerPro downloads.evilm3666 wrote: ↑Thu Dec 29, 2016 10:12 am I just sent a updated xdf for the BMW 506 chip number 965
This has many updates from the one that is in the download section.
It has the launch control/2 step rev limiter, corrected the scalars for the speed limiter, found the table for the IAC (idle air control), found the tables for Closed loop ( what engine load and rpm it is enabled and disabled) just to name a few. I set up levels in the xdf so to see everything you need to make sure the tab on the top of tunerpro all the to the right is set to all levels. I also have found how to turn off the CEL on the dash for any codes,but have not found out how to disable the codes altogether. This is not included in the new xdf. If anyone has any info on how this is done please email me. If anyone needs a CEL light turned off you can email me your bin file. I have been getting a lot of questions about tuning for larger injectors and tuning for E85. So I wrote up some info about how to do this. I think I may just post it up here.
I also sent a updated xdf for the 413 red label also. Not many changes to it. I always suggest updating to the 506 bin if you can.
Also please make sure the xdf you are using matches the bin file. You can always find the bin file number under ''BMW chip number" This is the most common issue I hear.
Could you help me with the .bin and .xdf?
my email is arguedas2322@gmail.com
It is to be used on a 143 red label.
thank you so much.
Pura vida