Hello,
thank you for this very useful TunerPro RT software.
I have a Ostrich 2.0 and a innovate LC1 wideband cable. With an adx file, i can see in TP the O2 value.
There is the option address hit tracing with the ostrich 2.0. Is it possible to datalog the O2 value when the ostrich is hit tracing? So than i can see, for each cell of a 12*12 table, what the O2 sensor measure?
(my car has an ALDL interface, but i have no ADX for ALDL)
Ostich 2.0 hit tracing and logging O2in a fuel table?
Moderators: Mangus, robertisaar, dex
Hallo,
this is from moates about ostrich 2.0:
"We do NOT offer any tools for datalogging on These (BMW) ECUs. A very limited amount of data can be gathered using the “trace” feature of the Ostrich2, which lets you see which data in a ROM is being actively accessed. There is NO history or logging of trace, only immediate feedback."
it would be very usefull, when i can log the O2 value (adx file works for innovate O2) and the ABCtable read position.
Maybe a Option for the future?
this is from moates about ostrich 2.0:
"We do NOT offer any tools for datalogging on These (BMW) ECUs. A very limited amount of data can be gathered using the “trace” feature of the Ostrich2, which lets you see which data in a ROM is being actively accessed. There is NO history or logging of trace, only immediate feedback."
it would be very usefull, when i can log the O2 value (adx file works for innovate O2) and the ABCtable read position.
Maybe a Option for the future?