Is TP5 compatible with MS Surface Tablet?

gregzmanson · Post by **gregzmanson** » Sat Oct 06, 2012 10:21 pm

Is TP5 compatible with the new Microsoft Surface Tablets?
Tks
Zav

Post by **robertisaar** » Sun Oct 07, 2012 9:32 am

http://en.wikipedia.org/wiki/Microsoft_Surface

after a quick look, i would wager that the Surface would not work with tunerpro, based off of it using Windows RT and an ARM processor.

the Surface Pro..... maybe, assuming win8 plays well with TunerPro.

i'd wait for Mark's input though.

Post by **Mangus** » Mon Oct 08, 2012 11:04 am

TunerPro (nor any other non-ARM-specific Windows software) will not work on Windows RT. It will work on any computer running the normal, x86/x64 based version of Windows 8 (includeing the Pro version of the Surface).

dustin77 · Post by **dustin77** » Thu May 07, 2015 12:24 pm

Don't mean to highjack this thread, but got a question with using the surfacepro.
I am not able to get the DA to connect at the same time as the hardware, I have to change the interface type to either the "use plug-in or Autoprom/maftpro" plug in to read the hardware and autoprom to get the dash board.
I am not the most tech savy guy, and this has been a very slow process for me to get this far.
Thanks Dustin

Post by **Mangus** » Thu May 07, 2015 12:34 pm

https://www.youtube.com/playlist?list=P ... 598D87BA29

TuenrPro settings depends on switch settings and how you intend to get data from the AutoProm.