Is there a way for you to make the gauges on the dash able to be made sideways with a sweep of 170 degrees?
I can make them horizontal half circles but only the top side of the gauge is allowed.
Might be easier to have a rotation setting for the object rather than recoding the existing or a new gauge type.
Bar graph type of gauge would be neat too!
Thanks for all your hard work
Jp
Sideways gauges?
Moderators: Mangus, robertisaar, dex
I just saw another cool looking gauge style on the "Torque" SW site.
A TPS % gauge in the center of the RPM gauge. Can see both needles and scales.
Having a stacked gauge would be neat for TPS and IAC, RPM with NV raito, Target AFR and WB AFR, EGR DC w CCP DC,
I love seeing what other call "too much data" when reviewing logs.
Bump for the bar graph gauge style too
Jp
A TPS % gauge in the center of the RPM gauge. Can see both needles and scales.
Having a stacked gauge would be neat for TPS and IAC, RPM with NV raito, Target AFR and WB AFR, EGR DC w CCP DC,
I love seeing what other call "too much data" when reviewing logs.
Bump for the bar graph gauge style too
Jp