I pay to make a XDF from my BIN

Discuss all other manufacturer-specific tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
floods
Posts: 7
Joined: Wed Feb 22, 2012 3:12 pm

I pay to make a XDF from my BIN

Post by floods »

Hello all,

Since a lot of time i search how to make a XDF file from the BIN file, but impossible to find anything who really show how to do.

Then i am ok to pay USD 100 or more if needed to the guy who can make me a complet XDF file from my BIN file.

The engine is a Renault PRV V6 2.9 liters with a Fenix ECU, i have already the BIN file from the ECU, just need to make the XDF.

A similar XDF file exist in the base from the website, but this XDF file is really not complet (only show spark advance table and injection time table).

If you can help me (and win USD in the same time), just send me a PM or reply to this post.

Thanks
Last edited by floods on Thu Mar 15, 2012 1:37 pm, edited 1 time in total.
floods
Posts: 7
Joined: Wed Feb 22, 2012 3:12 pm

Post by floods »

Nobody ?? :?
User avatar
EagleMark
Posts: 424
Joined: Mon Mar 22, 2010 11:11 am

Post by EagleMark »

If someone knew how to dissamble and comment that type file it would still be 20-40 hours of work...

guys like that usually have plenty of work at $40 an hour or so...

I wish I knew of a Renault type hac site to send you too?
1990 Chevy Suburban
1994 Buick RoadMaSSter Estate Wagon LT1.
1972 IH 1210 Isky Cammed Balenced 345 TBI

GearHead-EFI.com EFI Conversions and Chip Tuners!
floods
Posts: 7
Joined: Wed Feb 22, 2012 3:12 pm

Post by floods »

EagleMark wrote:If someone knew how to dissamble and comment that type file it would still be 20-40 hours of work...

guys like that usually have plenty of work at $40 an hour or so...

I wish I knew of a Renault type hac site to send you too?
HI,

Thanks for reply.

I understand now why nobody reply me :lol:

Can you do the file ? if yes, how much money you need ?

Thanks a lot
User avatar
EagleMark
Posts: 424
Joined: Mon Mar 22, 2010 11:11 am

Post by EagleMark »

No, I wish I could. I don't even know where to send you for help on that car? Sorry.
1990 Chevy Suburban
1994 Buick RoadMaSSter Estate Wagon LT1.
1972 IH 1210 Isky Cammed Balenced 345 TBI

GearHead-EFI.com EFI Conversions and Chip Tuners!
floods
Posts: 7
Joined: Wed Feb 22, 2012 3:12 pm

Post by floods »

Ok EagleMark, no problem.

If anybody can help me, please reply and tell me your price.

Or anybody can halp me to do the file ? i just don't understand how to find all informations in the BIN file.

Thanks a lot.
floods
Posts: 7
Joined: Wed Feb 22, 2012 3:12 pm

Post by floods »

UP :P
floods
Posts: 7
Joined: Wed Feb 22, 2012 3:12 pm

Post by floods »

UP :roll:
User avatar
dex
The Ford Guy
Posts: 612
Joined: Thu Oct 07, 2004 6:38 am

Post by dex »

Have you tried this website http://www.fenixecu.com/
floods
Posts: 7
Joined: Wed Feb 22, 2012 3:12 pm

Post by floods »

dex wrote:Have you tried this website http://www.fenixecu.com/
Thanks for reply.

Yes, that the 1st web site i ask, i contact the admin, it know how to make it, but don't have time to do it.

Thanks
Post Reply