Page 1 of 1

NEW BMW 506 xdf

Posted: Thu Dec 29, 2016 10:12 am
by evilm3666
I just sent a updated xdf for the BMW 506 chip number 965
This has many updates from the one that is in the download section.
It has the launch control/2 step rev limiter, corrected the scalars for the speed limiter, found the table for the IAC (idle air control), found the tables for Closed loop ( what engine load and rpm it is enabled and disabled) just to name a few. I set up levels in the xdf so to see everything you need to make sure the tab on the top of tunerpro all the to the right is set to all levels. I also have found how to turn off the CEL on the dash for any codes,but have not found out how to disable the codes altogether. This is not included in the new xdf. If anyone has any info on how this is done please email me. If anyone needs a CEL light turned off you can email me your bin file. I have been getting a lot of questions about tuning for larger injectors and tuning for E85. So I wrote up some info about how to do this. I think I may just post it up here.
I also sent a updated xdf for the 413 red label also. Not many changes to it. I always suggest updating to the 506 bin if you can.

Also please make sure the xdf you are using matches the bin file. You can always find the bin file number under ''BMW chip number" This is the most common issue I hear.

Posted: Sat Jan 14, 2017 3:56 am
by Brian Shor
Very good work evilm3666, many thanks especially from us keeping our E36 M running.

Posted: Sat Jan 14, 2017 4:15 am
by Brian Shor
Evilm3666 can you please email me your updated xdf for the 506 chip 965. Send to: brian_shor@yahoo.com

Thanks

Posted: Sat Jan 14, 2017 5:14 am
by evilm3666
Files sent.

Posted: Sat Jan 14, 2017 8:42 am
by Brian Shor
Thanks alot EvilM3666. The bin I did and sent you was with 29lb/hr injectors, stock S50B30US, 0.50front 0.63back, 10psi boost, pump gas, 344whp, 365lbft.

Posted: Wed Jan 18, 2017 4:42 am
by VRP
where is uploaded? can u send to saxoto@abv.bg

Posted: Fri Jan 27, 2017 12:10 pm
by evilm3666
Looks like it has not been posted to the download section yet.

Posted: Thu Mar 02, 2017 1:24 pm
by ticclint
Any chance you could shoot me one as well? - Clint@turninconcepts.com

Posted: Fri Mar 03, 2017 11:50 am
by evilm3666
files sent

Re: NEW BMW 506 xdf

Posted: Tue Oct 13, 2020 9:53 pm
by M50BEAST
Kindly send me the latest/most complete 506 xdf to - jodyvermeulen007@gmail.com. Thank you in advance :D

Re: NEW BMW 506 xdf

Posted: Sun Feb 07, 2021 1:43 pm
by zarboz
can you please send me the newest 506 xdf sbtoonz@gmail.com

Re: NEW BMW 506 xdf

Posted: Thu May 13, 2021 12:51 pm
by TheProctologist
Kindly send me the latest/most complete 506 xdf to Blondboy-emil@hotmail.com Thank you in advance :D

Re: NEW BMW 506 xdf

Posted: Wed May 26, 2021 8:05 am
by bomj911
Can you shoot me one as well? thanks in advance. bomj911@hotmail.com

Re: NEW BMW 506 xdf

Posted: Thu Aug 26, 2021 7:53 am
by kuningas75
Can you send me 413 and 506 updated xdf´s? ioannis.h@gmail.com

Re: NEW BMW 506 xdf

Posted: Sat Sep 04, 2021 4:51 pm
by tnasslb
hello
plz can you send me xdfs and tuned bins for 413 , 402 , 403 , 405 , 406 , 179 dme .... tonynassar89tn.tn@gmail.com

Re: NEW BMW 506 xdf

Posted: Wed Oct 20, 2021 2:02 pm
by Alexalx
Please send me xdf 506 and 413 . If you have 075xdf m3 euro. Please send at noroc.alex@yahoo.it

Re: NEW BMW 506 xdf

Posted: Fri Jun 17, 2022 9:41 pm
by saibex87
can you please send me XDF files for 405 brains saibex87@gmail.com

Re: NEW BMW 506 xdf

Posted: Fri Jan 27, 2023 3:25 am
by bryce
hi can i please have updated xdf for the 965 chip brycedow2349@gmail.com
thankyou

Re: NEW BMW 506 xdf

Posted: Fri Jan 27, 2023 9:19 pm
by Student
share the updated 506 file with me. Here is my mail antosevkolia@gmail.com thanks in advance.

Re: NEW BMW 506 xdf

Posted: Sat Feb 25, 2023 12:48 am
by Adhamkhe
The 506 xdf is updated on the tunerpro website. If there's a specific table that you need let me know and ill help as much as i can
Best regards

Adham al khechen
REVUP TUNING
Lebanon

Re: NEW BMW 506 xdf

Posted: Tue Mar 21, 2023 8:12 am
by Sinbad98
Hey, can someone send me evil's 506 bin and xdf? I want to use it for my red label 413.

I need every possible table, inclusive knock parameters.

Thank You :)

Re: NEW BMW 506 xdf

Posted: Thu Apr 13, 2023 8:49 pm
by Lambda1
US M3 = silver label.
Red label = M50B25TU. Maps sometimes different. Basemaps you can find easily in M50B25TU by your own.

Re: NEW BMW 506 xdf

Posted: Fri Nov 10, 2023 11:37 am
by larguedas
evilm3666 wrote: Thu Dec 29, 2016 10:12 am I just sent a updated xdf for the BMW 506 chip number 965
This has many updates from the one that is in the download section.
It has the launch control/2 step rev limiter, corrected the scalars for the speed limiter, found the table for the IAC (idle air control), found the tables for Closed loop ( what engine load and rpm it is enabled and disabled) just to name a few. I set up levels in the xdf so to see everything you need to make sure the tab on the top of tunerpro all the to the right is set to all levels. I also have found how to turn off the CEL on the dash for any codes,but have not found out how to disable the codes altogether. This is not included in the new xdf. If anyone has any info on how this is done please email me. If anyone needs a CEL light turned off you can email me your bin file. I have been getting a lot of questions about tuning for larger injectors and tuning for E85. So I wrote up some info about how to do this. I think I may just post it up here.
I also sent a updated xdf for the 413 red label also. Not many changes to it. I always suggest updating to the 506 bin if you can.

Also please make sure the xdf you are using matches the bin file. You can always find the bin file number under ''BMW chip number" This is the most common issue I hear.
Hi, I couldn't find this definition in the TunerPro downloads.
Could you help me with the .bin and .xdf?

my email is arguedas2322@gmail.com

It is to be used on a 143 red label.

thank you so much.

Pura vida :D