Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.
Moderators: robertisaar , dex
BrendanSmall
Posts: 52 Joined: Mon Nov 09, 2009 4:57 am
Post
by BrendanSmall » Thu Nov 12, 2009 1:18 pm
Hello all. I know this is a small forum, but I've got a q. I have a few OBD1 2.0 8v bin files, and have located quite a few maps with WinOLS...but would anyone out there have an XDF they'd be willing to share? I know it's been done, and I really don't want to spend 300 to buy an aftermarket chip and reverse engineer the maps out of it. Mainly because this is just for my personal car, and the challenge it presents.
Failing that, would anyone have any hints about certain map locations? I'll take teasers, I'm not too proud to admit that
.
revlimit
Posts: 202 Joined: Thu Mar 19, 2009 6:41 pm
Post
by revlimit » Fri Nov 13, 2009 5:38 pm
Post the bins, stock and tuned ones and I will make basic XDF for it
BrendanSmall
Posts: 52 Joined: Mon Nov 09, 2009 4:57 am
Post
by BrendanSmall » Fri Nov 13, 2009 5:59 pm
Unfortunately, all I have are stock bins
.
If those are helpful, I will certainly post them up
.
tom
Posts: 38 Joined: Sun Jun 21, 2009 9:07 am
Post
by tom » Fri Nov 13, 2009 11:51 pm
could you tell me code engine or number ECU??
BrendanSmall
Posts: 52 Joined: Mon Nov 09, 2009 4:57 am
Post
by BrendanSmall » Sat Nov 14, 2009 6:43 am
Engine code ABA (north american 2.0 8v crossflow), motronic 2.9.
ECU part #: 037 906 258 AE
revlimit
Posts: 202 Joined: Thu Mar 19, 2009 6:41 pm
Post
by revlimit » Sat Nov 14, 2009 2:33 pm
BrendanSmall wrote: Unfortunately, all I have are stock bins
.
If those are helpful, I will certainly post them up
.
I can't do it then
ecuconnection
Posts: 53 Joined: Sat Nov 21, 2009 10:52 pm
Location: Canada
Contact:
Post
by ecuconnection » Thu Dec 10, 2009 10:29 am
send me stock bins and I will make you XDF
taiajam
Posts: 37 Joined: Sun Aug 31, 2008 2:15 pm
Post
by taiajam » Mon Dec 14, 2009 6:46 am
Im interested in this xdf file also! i have a original 2.0 8v Engine code 2E file.
I can share this one
BrendanSmall
Posts: 52 Joined: Mon Nov 09, 2009 4:57 am
Post
by BrendanSmall » Wed Dec 23, 2009 7:24 am
I've been working on this XDF, making great progress too.
taiajam
Posts: 37 Joined: Sun Aug 31, 2008 2:15 pm
Post
by taiajam » Sat Dec 26, 2009 1:08 pm
whats the status right now?
is the xdf file already usable?
BrendanSmall
Posts: 52 Joined: Mon Nov 09, 2009 4:57 am
Post
by BrendanSmall » Sat Dec 26, 2009 4:53 pm
Far from useable, but I've located and started converting the maps into XDF format. It's a slow process
.
slappynuts
Posts: 2 Joined: Fri May 21, 2010 3:00 pm
Post
by slappynuts » Sat May 22, 2010 4:32 am
You guys know there is a look up table that contains every map in the file right?
BrendanSmall
Posts: 52 Joined: Mon Nov 09, 2009 4:57 am
Post
by BrendanSmall » Tue May 25, 2010 4:43 am
Yeah, I've found that and converted it all to an XDF. It's 'workable' but faaaaaaaaaaaaaar from complete right now, since I don't have a test vehicle
.
I've actually spoken to you via email about it
.
Quattro
Posts: 10 Joined: Mon Mar 15, 2010 9:34 am
Post
by Quattro » Fri Sep 03, 2010 2:41 am
slappynuts wrote: You guys know there is a look up table that contains every map in the file right?
Ok .. I have heard about this look up table .. How do you go about finding it ? Help perhaps ?