Search found 218 matches
- Thu Jun 07, 2012 4:29 pm
- Forum: Feature Suggestions
- Topic: Sideways gauges?
- Replies: 2
- Views: 10241
Sideways gauges?
Is there a way for you to make the gauges on the dash able to be made sideways with a sweep of 170 degrees? I can make them horizontal half circles but only the top side of the gauge is allowed. Might be easier to have a rotation setting for the object rather than recoding the existing or a new gaug...
- Fri Jan 20, 2012 3:25 pm
- Forum: TunerPro Discussion
- Topic: Mismatched XDF & ADS?
- Replies: 2
- Views: 5563
- Sat Jan 14, 2012 4:32 pm
- Forum: Report A Bug
- Topic: XDF table row label error
- Replies: 1
- Views: 6948
- Fri Jan 13, 2012 1:10 pm
- Forum: TunerPro Discussion
- Topic: Instant MPG calculation
- Replies: 36
- Views: 70603
- Fri Jan 13, 2012 12:58 pm
- Forum: Report A Bug
- Topic: XDF table row label error
- Replies: 1
- Views: 6948
XDF table row label error
I was looking over my files today and discovered something disturbing. In $8D there are proportional gain adjustment tables that have rows that start with "0". (Reference $84CF & 4DE for examples) All the tables I have that start with zero base label have been shifted to start from the...
- Wed Dec 28, 2011 6:44 pm
- Forum: TunerPro Discussion
- Topic: EFI Test Bench
- Replies: 14
- Views: 21621
You're hooked now so here's more fuel for the fire.
There are some diagrams and such for the items I built my bench from.
http://www.thirdgen.org/techboard/diy-p ... calcs.html
Pretty sure thats the link with the 555 stuff too.
There are some diagrams and such for the items I built my bench from.
http://www.thirdgen.org/techboard/diy-p ... calcs.html
Pretty sure thats the link with the 555 stuff too.
- Wed Dec 28, 2011 6:38 pm
- Forum: TunerPro Discussion
- Topic: ADX file question
- Replies: 5
- Views: 9128
- Wed Dec 28, 2011 6:28 pm
- Forum: General Motors
- Topic: Exhaust gas temp sensor how do I log it in TP5
- Replies: 1
- Views: 4768
- Wed Nov 02, 2011 11:56 am
- Forum: Feature Suggestions
- Topic: Graphing nulls, In/Out of Layouts
- Replies: 0
- Views: 4853
Graphing nulls, In/Out of Layouts
Quick thoughts... 1.) Is it possible to make the display graphs (in aquisition) ignore null values? Would autoscale much better I think, not sure if its detrimental to anything else. 2.) Import or export items such as dashboard defs, histogram defs, monitor sets, etc (or even the custom tool definit...
- Wed Oct 26, 2011 2:14 pm
- Forum: Report A Bug
- Topic: Fuel Map Data Looping
- Replies: 2
- Views: 8912
- Mon Oct 24, 2011 3:40 pm
- Forum: TunerPro Discussion
- Topic: wideband, yet again
- Replies: 9
- Views: 12731
- Sat Oct 22, 2011 6:58 am
- Forum: TunerPro Discussion
- Topic: wideband, yet again
- Replies: 9
- Views: 12731
Send me your 61.adx that works for logging if you can't get this to work. To add to the end of it all of the channels for the APU1 I see the 61 is 160 baud with 20 data items in the datastream. This change will add 6 to the end of that. Channel 1 = 23-24 Channel 2 = 21-22 Channel 3 = 25-26 Go to Aqu...
- Fri Oct 21, 2011 11:11 am
- Forum: TunerPro Discussion
- Topic: wideband, yet again
- Replies: 9
- Views: 12731
OK, Do you have a copy of the S_AUJP V4 1026 from Moates site? Its under custom biniries IIRC. Look at the attached documents with the package. In there is a document describing how to use the extra channels on the 7730 ECM and how to set them up in TunerPro (or other program) It covers scaling etc ...
- Fri Oct 21, 2011 8:30 am
- Forum: TunerPro Discussion
- Topic: wideband, yet again
- Replies: 9
- Views: 12731
- Fri Oct 21, 2011 8:28 am
- Forum: TunerPro Discussion
- Topic: wideband, yet again
- Replies: 9
- Views: 12731
This thread may help.
You need to add the A/D channels to your ADS/XDL definition.
They are listed here.
http://forum.tunerpro.net/viewtopic.php ... highlight=
You need to add the A/D channels to your ADS/XDL definition.
They are listed here.
http://forum.tunerpro.net/viewtopic.php ... highlight=
- Thu Aug 18, 2011 7:33 am
- Forum: General Motors
- Topic: Dashboard help
- Replies: 3
- Views: 6686
- Thu Aug 18, 2011 7:21 am
- Forum: Feature Suggestions
- Topic: ADX Value Filter Range
- Replies: 13
- Views: 19699
- Tue Aug 16, 2011 6:53 pm
- Forum: General Tuning Discussion
- Topic: Tunerpro +ls1 = ?
- Replies: 3
- Views: 13946
- Tue Aug 16, 2011 6:13 pm
- Forum: Feature Suggestions
- Topic: ADX Value Filter Range
- Replies: 13
- Views: 19699
I found a way to do this as is. Take the data and pass it through a lookup table with min and max values assigned. That corrected my economy values so they would not exceed 50 MPG when a zero reading would cause chaos with the math. Same with no data packets causing real high numbers. To do this mak...
- Wed Aug 10, 2011 6:16 pm
- Forum: TunerPro Discussion
- Topic: Inovate Wide Band LC-1 Serial Port to AutoProm?
- Replies: 2
- Views: 4887
Can't use the serial out as far as I know. Can tie the WB into the ADPAC inputs and log it that way. Doesn't change the signal by wiring to two places, just be sure to use the same ground point so they have the same signal level. there is a thread here describing the 10 bit scale for those inputs. S...
- Sat May 21, 2011 5:27 pm
- Forum: General Tuning Discussion
- Topic: memcal error
- Replies: 5
- Views: 11412
- Sat May 21, 2011 5:17 pm
- Forum: TunerPro Discussion
- Topic: Making a log file
- Replies: 17
- Views: 19397
- Sat May 21, 2011 5:11 pm
- Forum: TunerPro Discussion
- Topic: Bin Stacker
- Replies: 14
- Views: 23307
- Sun May 08, 2011 12:55 pm
- Forum: TunerPro Discussion
- Topic: Scaling the Moates A/D
- Replies: 16
- Views: 29182
- Tue May 03, 2011 12:35 pm
- Forum: General Tuning Discussion
- Topic: memcal error
- Replies: 5
- Views: 11412
- Wed Apr 13, 2011 6:18 pm
- Forum: Feature Suggestions
- Topic: User definable buttons for realtime tuning ?
- Replies: 9
- Views: 20054
Table adjust
If you are in the graph view you can grab points to adjust on the fly.
The "F7" window gives you sliders to adjust constants too.
If that is not working, check your preferences settings in the Data aquistion tab (in Prefs) and select "Real time graph and slider Changes".
HTH
The "F7" window gives you sliders to adjust constants too.
If that is not working, check your preferences settings in the Data aquistion tab (in Prefs) and select "Real time graph and slider Changes".
HTH
- Wed Feb 23, 2011 1:01 pm
- Forum: TunerPro Discussion
- Topic: having issues emulating and making changes? Autoprom
- Replies: 8
- Views: 12915
- Tue Feb 15, 2011 12:58 pm
- Forum: TunerPro Discussion
- Topic: Scaling the Moates A/D
- Replies: 16
- Views: 29182
OK, did some checking. The $42 data stream only contains 20 items. Change the values to be next inline after the original data. Try this: Channel 1 = 23 -24 Channel 2 = 21 -22 Channel 3 = 25 -26 something should indicate with those values. The only other thing I see within the definition would be to...
- Mon Feb 14, 2011 7:33 pm
- Forum: TunerPro Discussion
- Topic: having issues emulating and making changes? Autoprom
- Replies: 8
- Views: 12915
- Mon Feb 14, 2011 7:22 pm
- Forum: TunerPro Discussion
- Topic: Scaling the Moates A/D
- Replies: 16
- Views: 29182
As seen above, there could be a mixup in the channel numbers and addresses. Channel 1 would be byte 67, not 65. Make sure you are set for 16 bit values. The A/D data window shows the data from the AutoProm at a high rate of speed (different from the ALDL data) To include the dat from those displays ...
- Mon Feb 14, 2011 7:09 pm
- Forum: TunerPro Discussion
- Topic: BLM History Table
- Replies: 3
- Views: 7405
- Mon Feb 14, 2011 7:07 pm
- Forum: TunerPro Discussion
- Topic: APU1 + LC-1 Diagram
- Replies: 7
- Views: 15785
- Mon Feb 14, 2011 6:55 pm
- Forum: TunerPro Discussion
- Topic: Scaling the Moates A/D
- Replies: 16
- Views: 29182
- Thu Feb 03, 2011 5:46 pm
- Forum: TunerPro Discussion
- Topic: Tip: Calculated Value Control
- Replies: 0
- Views: 3009
Tip: Calculated Value Control
I found a way to correct for calculated values that sometimes display 1.#J or other incorrect displayed values due to null or out of range numbers. These types of displayed values will skew your Histogram graphs from being readable due to one sample being way out of rrange of the other values. a.) c...
- Wed Feb 02, 2011 4:31 pm
- Forum: Feature Suggestions
- Topic: Custom Tools export/import
- Replies: 2
- Views: 6919
Anther Thanks,
Just updated to 7532 and all custom tools remained.
Great work.
Super Kudos !!!
Great work.
Super Kudos !!!
- Wed Feb 02, 2011 3:41 pm
- Forum: Feature Suggestions
- Topic: Comm macro selection
- Replies: 3
- Views: 8643
Thank You :)
Took me a minute to find it but am anxious to try it out.
Thanks again for your hard work on this most awesome application!
John
Thanks again for your hard work on this most awesome application!
John
- Tue Dec 28, 2010 8:39 pm
- Forum: TunerPro Discussion
- Topic: Help with $8D Fan Disable MPH
- Replies: 2
- Views: 4467
- Tue Sep 21, 2010 11:31 am
- Forum: Feature Suggestions
- Topic: BLM TABLE
- Replies: 14
- Views: 30381
- Sun Sep 19, 2010 3:33 pm
- Forum: TunerPro Discussion
- Topic: V5 Wide Band Addition
- Replies: 15
- Views: 23285
ADX item creation
Create the ADX "Value" item on the correct offset (word or channel #) with the conversion numbers below. The ADPAC external channels for the AutoProm are 10 bit so they use 1024 steps for a zero to 5 volt input signal. Set the size for 16 bit value. Use 15.04 AFR span/1024 counts = 0.01468...
- Tue Sep 14, 2010 6:55 pm
- Forum: Feature Suggestions
- Topic: Comm macro selection
- Replies: 3
- Views: 8643
Comm macro selection
I was just thinking that it would be nice to put a dropdown box on the Data Aquisition toolbar that would select the macro to run when the connect button is pushed. Might be an easy way to implement command switching/selection. Only listing macros shortens the listing and the user can create macros ...
- Sun Sep 12, 2010 6:09 pm
- Forum: TunerPro Discussion
- Topic: V5 Wide Band Addition
- Replies: 15
- Views: 23285
This may help too.
http://forum.tunerpro.net/viewtopic.php ... ht=scaling
http://forum.tunerpro.net/viewtopic.php ... ht=scaling
- Sun Sep 12, 2010 6:01 pm
- Forum: TunerPro Discussion
- Topic: Making a Dash in TP V5
- Replies: 11
- Views: 42796
Day and Night setting
Making you dash for bright light use... After you create your "Dark Dashboard", Make a backup copy of your ADX file in case you do the following incorrectly. You will not loose your starting file. Create a new dasboard with 1 item in it. (The following is NOT supported and is only done at ...
- Sun Sep 05, 2010 6:17 am
- Forum: Feature Suggestions
- Topic: Custom Tools export/import
- Replies: 2
- Views: 6919
Custom Tools export/import
Possible way to make the tools portable for reloading upon updates or transferring to other computers.
Currently they have to be recreated in each place.
Thanks for the GREAT work so far!
Jp
Currently they have to be recreated in each place.
Thanks for the GREAT work so far!
Jp
- Thu May 20, 2010 5:37 pm
- Forum: TunerPro Discussion
- Topic: AutoProm A/D Data
- Replies: 1
- Views: 4591
A/D Channels
This should help
http://forum.tunerpro.net/viewtopic.php ... ht=scaling
The addressing is for $8D but add the next address after yours if running a different mask to get them to read.
http://forum.tunerpro.net/viewtopic.php ... ht=scaling
The addressing is for $8D but add the next address after yours if running a different mask to get them to read.
- Sat Mar 27, 2010 3:34 am
- Forum: TunerPro Discussion
- Topic: F8 (default)
- Replies: 1
- Views: 3823
F8 (default)
Just want to say I Love "F8"
Especially on the dual monitor desktop reviewing logs with tracing.
Of course the new 5746 additions too. Have lots of things to think about now.
Great work Magnus.
Others, If you haven't found it yet, try
Especially on the dual monitor desktop reviewing logs with tracing.
Of course the new 5746 additions too. Have lots of things to think about now.
Great work Magnus.
Others, If you haven't found it yet, try
- Tue Feb 09, 2010 6:38 pm
- Forum: General Tuning Discussion
- Topic: Need 7730 V8 memcal info
- Replies: 8
- Views: 15656
Memcal info
Check out this one.
I measured them but have still not done the tracing to see what does what. If you have anything you can add it would be appreciated.
Jp
http://www.thirdgen.org/techboard/diy-p ... emcal.html
I measured them but have still not done the tracing to see what does what. If you have anything you can add it would be appreciated.
Jp
http://www.thirdgen.org/techboard/diy-p ... emcal.html
- Thu Jan 21, 2010 6:28 pm
- Forum: General Tuning Discussion
- Topic: reduce fuel
- Replies: 54
- Views: 117824
- Thu Jan 21, 2010 6:13 pm
- Forum: General Tuning Discussion
- Topic: HELP
- Replies: 3
- Views: 6255
Also look over at http://www.thirdgen.org/techboard/diy-prom/ Go up to the Tuning guid sticky and read till your eyes bleed. Don't overlook other catergories of systems because many of the theories still apply but just need to interpet the function to your setup. Good luck, its worth it to do it you...
- Sun Dec 13, 2009 7:37 pm
- Forum: Feature Suggestions
- Topic: Dropping Bad Frames
- Replies: 1
- Views: 5496
- Fri Nov 27, 2009 10:30 am
- Forum: TunerPro Discussion
- Topic: 92 CORVETTE MEMCAL
- Replies: 8
- Views: 12187
000000 -> 007FFF is the correct setting for the $8D.
it is a 32K bin file.
Here are all the offset types and details
http://www.moates.net/documentation.php ... tion_id=75
Be sure the chip is not backwards in the reader.
it is a 32K bin file.
Here are all the offset types and details
http://www.moates.net/documentation.php ... tion_id=75
Be sure the chip is not backwards in the reader.