TunerPro User Forum

bernhard

me too

checked some week ago, it worked again.
checked this day....descripted error.
maybe a redirektion-problem by the provider of the webspace?

bernhard

some coincells and a batteryholder is ordered now.
I 'll solder it parallel to the build-in battery first; that should allow to confirm my suspicion. or not.

to be continued...

bernhard

where has my first post disappeared, discribing the problem??

bernhard

update: measured under load the voltage of the battery break down under 1,5volt. so the promotional description of moates "battery lasts as long as the car" seems to be a little bit too optimistic. :evil: next step: unsolder the battery and install a battery holder. to use a changeable bat...

bernhard

are you still of the opinion with linux? its much more stable than windows, and i read in the bug-sektion about much trouble with win10 for example. :wink: I use windows only for gaming and some spezial programs (like TP) now. many do like me. linux and wine sometimes causes timingproblems, so I wou...

bernhard

when clicking check for updates allways appears
error 0#2EEE.

because the error appears also at old versions of TP (where this function worked in past), I suspect a servererror at your update-server?

my latest 9130.00

bernhard

I've ordered a second ostrich for my experiments, and a saw, that pin 1 of the dil28 -connectorcable is missing at the new cable.
is there a special purpose or is it done to prevent damage?
(because normally pin 1 is programming voltage?)

best regards bernhard

bernhard

if i choose 'select all' and next copy selection it crashes
little demonstration

https://youtu.be/FLXQ7US3z0M

it works, if i will select 'by hand' and copy than.

bernhard

first try to use a map with the 3 ignition tables, tey are much better. which kind of digifant do you use? DP? or the old A? the start up enrichment has influence to every thing of the ecu, from idle to boost. ok, mal auf deutsch ;) die neuen 3 map sind deutlich ausgefeilter. nimm die lieber die sta...

bernhard

sciroccoboi16v wrote:I spent all this time disassembling the code...

It is usually sufficient to change the branch address in the routine.
for example bne into beq.
then it works with every checksum, except the right one (for normal).

try to find this branche.

with best regards
bernhard

bernhard

like the headline. when I mark in graphic view (3D) several points and try to move them all together, it works only by the mouse. while trying to move the marked points up/down by tastatur ('+' or'-'), only ONE point is moved. in 8519 it works perfectly (ok, a little bit slow :wink: ), but in 8606 i...

bernhard

why does everyone use a grautec? my ostrich works fine without any grautec adapter. even with the marc g60 xdf one the other hand, you might have the 'old' bin with only one ignition-map no way with marc's xdf you shouldn't use the old; the new since ECU 'DP' are much better progged with best regard...

bernhard

why do you use a grautec?
ostrich 2.0 alone should be enough?

bernhard

Is this possible with tunerpro? Can I make something to do this? With a button or something? if you already have an xdf, you much easyer can adapt ignition, fuel (very important, because you need up to ~40% more E85 than gas), startenrichment.... the easyest way would be, to use a chip on which you...

bernhard

I just 'retrained' the keyboard with tools -> preferences -> keyboard - and now it works. there is offered a lot of set-up options; I haven't had a look at it. my mistake, sry. might be, that the default setting didn't work, because I'm using a german keyboard/driver? doesn't matter, it works fine n...

bernhard

Thx. I hope, that not a special hardware/software constellation on my pc was the reason. (and you tries it in vain :oops: ) the strange disappearing only happens, when i load a new .bin in the comparelist. mostly i've used only one to compare. apart from this, TP is a really, really fine program :wi...

bernhard

I just tried to reproduce it, and... it works. :?: until I tried to load a fresh .bin into the comparelist and highlight it. then things happened like my description. clicking the wireframe, and the marking point disappears. and was lost in open spaces of RAM :lol: a minor bug, and only a 'specialis...

bernhard

might be a fine thing, if the point(s) in the wireframe could be changed by using the '+' and '-' (or arrow up/down....something like this) for example for one click '+' the value increases 01h. only with the mouse it is a little bit imprecisely. and permanent switching between graphic and text-view...

bernhard

not a great thing... when I switch to 'compare bin' in wireframe and switch back to normal graphic view from this mode, I can't mark any point. No matter if its shown in color whether wireframe. I must close the window/graphik view and reopen it. Then it mostly works again and I can mark and change ...

bernhard

thx! It's a pity. I've hoped, with Ostrich there is also an opportunity to show the ram, where the value of pressure etc. is commited to the ecu. so like man-in-the-middle :D ok, this will not work... one way may be, to write a little program into the ecu, which jumps to a special adress when pressu...

bernhard

yoda has explained it better than me. this was exactly i maent.

I thought, in emulation-mode the ostrich(PC?) is substituting the ecu?

may be, I misunderstood generally, what emulation-mode mean?

thanks for helping, with best regards

btw.: what is

quarterhprse

?

I only find horses under google?

bernhard

pooh, i hope I can explain it with my english.... it's for the ostrich - is there a way to show changing values in a cell, for example where the pressure value is passed? written in cell 01h; maybe 00h for vakuum :D and FFh for 2bar pressure? and the changing value is shown continuously? with best r...

bernhard

EagleMark wrote:Data tracing in the Wire Frame view would be a good tool.

I also wanted to suggest it, when I saw this thread

bernhard

I want tell you, the author, that you are doing good and useful work and encourages you to continue developing it.

but one question: is the key also for using on a second pc?

at me, it would be a normal pc and a laptop in car?

with best regards
Bernhard

bernhard

the B57922 was specially designed for bosch
may be, there is a 'trap' included. unfortunately I haven't had a chip like this yet, so iI can't say more

have you tested with B57922 or normal 27c256?

btw: the range is normally 7fff, not 8000.

bernhard

I'm using a new laptop lenovo and have installed a small windows XP, SP3 normally I use linux on it; starting XP by the linux bootmanager. Tunerpro works well, but the ostrich wasn't recognized. :?: after searching in www, I found a tip for using a game console, this needed a FT232R USB driver. I in...

bernhard

hittracing don't work with 8369 and ostrich 2.0 / bosch digifant 1. with 8202 and 8144 it works. with the 8369 version the ostrich ist recognized, load up/ down a .bin into the ostrich works, too. but in tracing modus it still remains on waiting ... but no jumping yellow cursor will appear. i though...

bernhard

ok. i 've just understood that it is found under acquisition and not directly in the dash-window

i have defined one nice analog gauge; i m trying on

bernhard

can't i create a gauge or digital dash while using the ostrich?
something like rpm, lambda?
https://www.youtube.com/watch?v=Qf3pjZtN16Q

i would like to use binary data from the ecu, but the 'dash' window is allways clear and i cant add anything?

with best regards
bernhard

bernhard

sometimes it runs on SP2, but did not find the ostrich.
installing SP3 solved this problem, too

bernhard

is there any opportunity to show the actual RPM in tuner pro while in emulation mode?
with digifant 1 G60

with best regards
Bernhard

bernhard

damit kannste loggen
link

du bist nicht zufällig snooopy365?

in english: the guy in the link has built a logger for the digifant

have also a look @ this thread

bernhard

ok- solved by workaround.

if i don't choose hex in the generell xdf-menu but with a right mouseclick on the table and choose 'show raw hex' , then it works

the graph is ok then.

but i've got an other problem.....maybe in a next thread

bernhard

when i chose in output type for the numbers 'integer', the graph will shown fine. but when i change the output type in file to 'hex', the graph becomes ugly- it seems, the programm takes totaly wrong values for the graph now?! but as a programmer i prefer hex.... :cry: two pictures, which will bette...

bernhard

just devide 1000/256.
you will see, that 1byte about 3,9ms

best regards
bernhard

bernhard

me too,
thx and best regards
bernhard

bernhard

I have got the same problem at my G60/corrado. it took about an hour to connect the ignition and fuel map to the rpm -table :shock: its a little bit difficult, specially if you have to find and translate the relevant things in tunerpro first :wink: -> coming from germany (german AUTOBAHN, you know?:...

TunerPro User Forum

Search found 37 matches

update has malfunction

first pin gone @ostrich?

crashes when copying - minor bug

Re: Emulation Checksum Update?

bug in graphic view - moving points?

changing in wireframe

small bug in graphic view

show the value of a cell continuously

Re: Data Tracing

key

Tipp if Ostrich is not recognized on a new laptop

ostrich 2.0 hit tracing latest version do not work

digital dash / gauge

show rpm on g60?

bug or feature in view of graph?