TunerPro User Forum

Thanks for the shortcut possibility of the inc & dec function.
Is it possible to be able to also make a shortcut for the "Commit changes".

If you're trying to copy a table from another part of the bin (within the XDF), and essentially paste it into the new table with an offset, I'm not entirely sure how that could be done easily. Correct! I have two different maps within the same bin in the XDF that I want to combine into one and by th...

Hi, Need some help to find a easier way to implement the following: XDF Conversion per cell with value from another map. I have a bin with - one mainfuelmap (mfm) 16X16 - one rearoffset fuelmap(rofm) 16X16. The fuel for the front (ff) is mfm The fuel for the rear (rf) is mfm + rofm To make a rf map ...

Anyone with C++ programming skills that can look into this and write a plugin?

I do not think Parameter finder works for me.
In Hex Editor would it be possible to add a search function?
Searching for 8-bit or 16-bit value in hex or dec format ?

Hex Editor
Would it be possible to have the value presented as 16-bit value?
MSB, LSB or Signed in
hex or dec format ?

2D Data Viewer
Could it be possible to maximize the window or make it bigger?

six_shooter says the same thing as I say. If you open dash and use F8 and then move the dash to the slave screen. You can maximize the dash in the slave screen. But it will still have the blue bar at the top. What you not can do is to double click on the upper blue bar to get full screen. (No blue b...

Think there is a confusing of the terms used here. Maximize If I use the symbol in the upper righ hand corner of a window. That will "Maximize" the window but the window will still have the upper blue bar. And will not cover the taskbar. Also alt + spacebar and then X can be used Full scre...

Thanks for the confirmation.

Thanks! But just let me know if it should behave like this. Tunerpro in main screen, open the dash, press F8, move the dash to the slave screen, on the dash window press the symbol in the upper right corner to maximize. Fine! It is now maximized in the slave screen, althou with the upper blue bar at...

Hi, Running TunerPro + emulator + OBD (ADX) on a laptop(main screen) with additional screen(slave screen) for Two screen setup. (Dell E5500 laptop + WIN XP Pro sp2 + extra screen) On the laptop I want to have TunerPro running with the Fuel & spark map table opened. The dash I want to "move&...

This would be a very useful funtion for the Marelli ECU, 15M, 16M & P8. I would like to have it as a dialog box or button. For two different funtions. Troubleshooting: Be able to send different error/status questions and translate the answers. Perform test: Be able to perform different testfunti...

Just go
Acqusition ->Edit definition ->ADX Header Data
- check the box for "RS232 Echo"
Save
Done!

Do a search on ebay for
"obd2 usb vag kkl" and
"Fiat Lancia Alfa RomeoOBD2 Diagnostic adapter "
BR

Use the lockuptable funtion.
Since it is two linear funtions that will do it.
Works for me.

Let me know if you find a solution for the adx conversion of the RPM not to show 229 at standstill.

Tried a couple of different things. For AA) I used a lockuptable. Worked since it was two linear funtions. For BB) I made another value for the MSB part that I linked to the value for the LSB. Tried to make a value with an output of 1 or 0 as integer. And used it linked in another value. But that di...

Hi, Need some help to get the conversion right for a scanned value in my .adx. AA) When I ask the ECU for the TPS value the ECU answer back with a 8 bit value = X. (0<= X <= 255) The conversion of the value should be for X < 171 TPS = X*0.1848-1.41 and for X > 170 TPS = X*0.7058-90 How should I impl...

OK! Maybe I am slow. Culd you please explain how Plug-in is used with relation to an .adx ? Could the TechEdge.adx be done as a plug-in instead ? For example if I do not connect to the ECU for getting the sensor values. Instead I use Innovate LC-1 and a auxbox and get up to 32 channels on the MTS da...

Here is a copy of the Innovate Serial Protocol 2 for the Innovate LC-1 and the MTS system. It says that this will also work for LM-1 (Serial Protocol 1).
http://empegbbs.com/ubbthreads.php/ubb/ ... llog-2.pdf
http://www.jobyteknik.homeip.net/pellet ... llog-2.pdf

http://www.dlpdesign.com/usb/io8.shtml

Have anyone used this, and used it as analog input 0-5V for LC-1 into v5.
Seems to have a 10-bit A/D 0-5 volt range.
Communicate with 115200 baud rate using single-byte commands.
The result back is given in binary (raw data).

/Henrik

Trying to connect LM-1 via serial port using the serial protocol into TP v5. And also trying to connect up to 2pcs LC-1 via serial port using the serial protocol 2 into TP v5. I can not take the LC-1 via the ECU and I do not want to use the 0 -5V signal. For v5 Can any of you more experience take a ...