TunerPro User Forum

thanks shooter.

i see thanks for clearing that up robert. yes they where shooter.

the full name is spark . and in functions spark. that is where it will say null. its doing something because the values change .but the heck if i know what . there is a graph for it in functions address 0000.

well im sure there is more then one $42 file . and that is a problem for newbies like myself .you never know what your going to get . like stuff maped and pushed to go lean . but my finally getting my motor's tune lined out. i put some 80lb injectors in it. so i can run rich .and not have to worrie ...

im using anlw $42 six shooter and the address hex is 00 and in functions the address is 0000

i took a look at some other mask id's and there is no spark null adjustment or what ever that function does. i also noticed the spark advance correction vs coolant goes from 60-100kpa in the $42 xdf im using. and from 40 -0kpa in 747 xdf. these value's are all so different. but the cold spark bias i...

Six_Shooter wrote:What mask ID?

$42

your welcome im new to this myself without the lap top. a 160 thermostat will help it run a little richer if lean is the problem . and you could increase the fuel pump pressure for a overall richer condition. rich is better then lean rich u replace plugs lean you replace the motor . untill you get a...

man your fast six shooter i usely never get a reply to my?'s. $42 747

hello, i hoping some can explain this. in constants where it says spark. there is a table or adjustment from 0-255. i pluged in a stock bin made some minor change's to the iac's . never touched the spark tables. and the spark changed from 130 to 124. i have all so seen it change from 130 to 5. there...

got it going my way 02 sensor that is cold spark vs coolant temp way off. and a few other adjustment. also tuning for open loop all the time now might as well put the 200.00 dollar wideband to use.

if you havn't done it already i would change the tbi fuel pump 13psi."lean" for the larger much need tpi fuel pump and run a tpi bin. just a though from a newbie.

i need to know what needs to happen to get the o2 sensor air/fuel mixture to match the spark plug reading . when my wideband reads between 12.7 rich the plug are as clean as new. (lean) if i non cap the headers the wide band reads 20.0 lean .and the plugs are carbon fauled.when i reconnect my 21/2 i...

the above problem short in ignition switch.

thanks for tip yoda 69

hello everone, i have a spark problem i have never seen before. everypart of the ignition system is new. the problem is i have a glowing spark around the base of my spark plugs replaced 3 time with 3 different brands. it is not a hard spark as in a jumpin spark but a glow around the smoohe base of t...

thanks for the reply robert

nope still graping out just like my wallet lol.

would like to add cam is xe268h-14 which slams the valves closed could that cause knock's?

hello, can some explain the difference in brust knock retard and knock retard. and what needs to be done to disable them in $42. i see no way to tell which is which when data loging .im trying to tune a new mild sbc . im geting knocks in park and the engine has not been over 3000 rpm. runs ok in ope...

i got it fixed thats what i get for useing a 2oclock timing tab with a 12oclock balancer

in tools make sure you have the interface type set @232/2trans. and your data logger in 10k. thats about all i can thing of .there are others with more info then i.

Hey men, i need some help tunin my brand new motor. set up is this. 350 .040 over eagle blanced rotating asy. 9.8.1 compcams xtreme energy. 268 224/230 479/480 114 lsa. aluminum heads 190runners 64 cc chambers. xram intake "open plum"with stock tbi's. @13psi fuel pressure.7747 ecm. on a st...

thank you mr saar. i geuss i have a lot to learn if i can find the info needed to learn it. im just not really comfortable changing thing's around when i dont understand how they afect the engine. it sounds like to me this is the point where the centrifugal timing takes over. but i could be wrong. i...

though i seen your name before the xdf file ads file's im using says you are the AUTHOR. unless there are to robert saar.

well then would you mind telling me what min mph for highway spark means . is this the point where the timing is all in ? surely not!! at 30mph why dont they put this in terms that can be understood by those who havn't been machanics for 20 yrs. i dont have 20 yrs to ponder on there language i just ...

hello , i am new to this and i was wondering. is there a place on the web that will describe . what the constants/scalars do for$42 also the tables. i say for $42 because they change according to the xdf file /bin your using . this would be very helpful for us newbies that dont know what changing wh...

well good news its working now. checksum box unchecked and it update's and makes changes to the car when running . the only thing i did different that i know of. is redown loaded tunerpro rt. a big thanks to you six shooter.

i have had emulation enabled and im using tuner pro rt 4.14 .. the only thing i have changed on my own is in checksum it did read oxaa to off set ox08 so i changed it to o4 but i didnt change oxaa because i dont know quack about hex . should it be oxoo to off set oxo4 . just a geuss.

ok sixshooter u got me learning here i think. :D when i downloaded tunerpro rt and opened it up for the frist time there where already bins and ads files loaded in it. my check sum reads oxAA to off set oxo4 . im not using $59 so oxaa would be incorrect. correct? the only time verify does not fail i...

thanks for the reply sixshooter.using xdf42 ads $42 . i have the box checked to disable checksum by uploading 0xaa to off set ox04. is that correct? when i hit the update it does so. then i hit verify ram and verify fail's. verify fails when uploading different bins to my ostirich also. unless i unc...

hello everyone, im using tunerpro rt with a moates aldl and ostirich2. 747ecm with a moates socket booster. my problem is this. code 51 prom shows up in flags evertime. next problem im having is when i make a change in flags lets say set code 32 and hit the update button . nothing happen. no changes...