TunerPro User Forum

another nice feature if it isnt in there allready would be being able to setup the data tracing bubble to display values such as when datatracing the ve table you could have the bubble displaying wideband a/f ratio.or knock displayed when tuning the timing table

i may as well report a bug in this thread too saves making another thread .you may allready know about it anyway.
when emulating if you click copy compare bin value in a scaler window you cannot update to ecu unless you change the value to another value and hit enter

good to see youre still at it mark long time no chat

may i please suggest auto selection of cells in tables so we dont need to select each cell manually when realtime tuning.i have used other software that does this and it makes tuning so much faster when you can just throttle into a cell and hit an up or down button to change ve or timing while in a ...

you dont even need to mess with code as you may have seen we used the injector voltage monitor wire the other day with just a changed adx for logging it as wideband instead of injector volts .theres quite a few inputs you can use on most ecus well the delco anyway.i do see the extra inputs of the LC...

why not feed the 0-5V output into the ecu and setup a scannerpro definition like we do lets you see A/F ratio in realtime or in logs and can be output as a histogram and overlayed over your ve table works great

we have some good DIS info on our delco forum at www.delcohacking.net few CAD drawings of crank triggers and heaps of info on the gm systems theres 2 kinds of V6 DIS modules one runs 2 seperate trigger wheels through a duel halleffect sensor anf=d the other uses a single trigger wheel and hall effec...

silly me just realised you can allready do this with scannerpro LOL so i guess thats whats being used in V5 looks great only one downfall was the auto row labells would be nice to be able to select the map values myself as they dont match the bin map values if i go over 80kpa which is fine for BLMs ...

i just looked i have a bigger $4E mate has 2 or 3 more flags and lots of other settings ill email it shortly

so you got that xdf i emailed then mate.its not the biggest but it has most things.i might be able to find a few more locations for you

on moates fileman under tunerpro xdf's gm definitions theres a RAR file called goodies it has every USA definition including the $1FA

it can be had from here http://delcohacking.net/forums/viewtopic.php?f=7&t=5 its called 16199728_ver2.zip

i think theres a partial A5 here http://delcohacking.net/forums/viewtopic.php?f=7&t=5

you little ripper just what i was after much better now thanks mate will work awesome now never seen that setting before LOL

chears mate that makes the graph bigger but doesnt make the silly little dot area any bigger so you can grab them easier if you know what i mean wound be nice if the area around the dot for selection was bigger say 5-8 mm circle

I am about to start useing Tunerpro incar while on the move and have noticed its sometimes an effort to select points on the graphs even on the desktop without shaking round like in a vehicle is there any way to change the size of the selection area to make grabbing points easier.

i had a similar problem after opening big 3d tables that wouldnt fit on the screen needed to scroll to find the 2D tables i opened plus sometimes they open under the items list as well so have a hunt they will probably be there hidden under something.

i do it all the time when logging with winaldl and tuning $5D holden bins just devide 128 by the actual blm shown or it could be the other way round and it gives you the percentage to enter into the toolbox of tunerpro for the ve table select multiply enter percentage click go one or 2 logs gets its...

a rpm vs kpa table in the aldl section displaying BLM numbers so one can devide the number displayed by 128 to get the percentage of ve to add or remove from the ve table to get the ve right worked out of fuel trims as you have said

i know youre flooded with requests for ne features and nearly though V5 but what about a BLM table in the aldl scanner.ive allways tuned with BLM's as do many others but none of the 8192 baud aldl readers have a blm table would be a nice addition somewhere in tunerpro/scannerpro.

thanks for the quick reply much appreciated cant wait for its release chears

does that mean scannerpro has been added to it too.will it be using adx or ads files as we are creating some holden ones now and would like to know what to expect to save making 2 of each.cant wait to try it out.any idea on a release date mode 4 is what im after

i have a $51 xdf for non supercharged came off the net perhaps streetcommodores website i could email a copy if you still need it

Yes please add me to the list of people wanting this feature would love to see it allready have the hardware coming.