TunerPro User Forum

G’day,

Is FN885 (airflow for A/C) called something else in Tuner Pro?
The strategy I’m using is NVXN3.xdf, I have an A/C rpm adder in the scalars which is having no effect unless I amp up the numbers in FN1861 (Tuner Pro’s “idle airflow multiplier”)

Any help much appreciated
Pete

Sorry, I should have updated this. The issue was a dodgy earth between ECU and car body. The car ran fine so it was enough for the ECU to control things but not good enough to allow the QH to talk to it. It now has a good ground so the EEC-V and QH are conversing regularly. The old Windsor is really...

Just found this -

".ADX files: A TunerPro specific acquisition file used to stream/log data from the ECU in your car to TunerPro"



So I need a strategy, yes? Any tips on where to obtain one?

Hi Guys, I have an Australian '98 Ford, 5.0 with EEC-V. Catchcode is WTGB, WR2T-12A650-GB. Using QH and Tuner Pro RT I can capture the stock bin file from the ECU. I then load the stock bin file into QH but the ECU won't read it (car won't crank, temp gauge goes straight into the red). I'm using NVX...