When I read the Atmel 256 chip with the Autoprom and a start address of 04000 it should read a 16k file but it saves a 32k file.
I can load a 16k bin onto the 256 chip with a starting address = 04000 but it won't verify correctly.
I do not stack my bins and used the Pocket Programmer II without this problem.
TunerPro RT Chip Programming
Moderators: Mangus, robertisaar, dex
-
Bluevette85
- Posts: 3
- Joined: Sat Jan 03, 2004 7:12 am
- Location: Latham, NY
Sounds like a bug. I'll look into it and get it fixed. You'll probably find a lot of this stuff around chip burning (its not an easy problem to solve).
The verify is known issue, as it doesn't currently make use of the start address. I will be fixing this for the next release. THe chip does burn correctly though (if you burn a 16k bin on a 32k chip starting at $4000, it should work fine). I'll have to look at the read issue.
THis will get better over time (like everything else). Thanks for your patience!
The verify is known issue, as it doesn't currently make use of the start address. I will be fixing this for the next release. THe chip does burn correctly though (if you burn a 16k bin on a 32k chip starting at $4000, it should work fine). I'll have to look at the read issue.
THis will get better over time (like everything else). Thanks for your patience!
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am