Moto Guzzi Marelli MIU G4 tuning using TunerPro XDF

Discuss all other Motorcycle tuning topics here. Request definitions, discuss parameters, etc.
Post Reply
User avatar
OldSkullTuning
Posts: 285
Joined: Sat Jan 09, 2021 12:25 am
Contact:

Moto Guzzi Marelli MIU G4 tuning using TunerPro XDF

Post by OldSkullTuning »

New TunerPro bin definition files (xdf) series for Moto Guzzi euro5 with ecu Magneti Marelli MIU G4 (also called 38M4G2 or MIU4).

Some of the supported motorcycles:

Moto Guzzi V7 (euro 5)
Moto Guzzi V9 (euro 5)


You can tune the most important engine maps with our bin calibration files (called XDF): spark advance, fuel (lambda), torque, idle engine speed, rpm limiters, etc.

Price 70 euro.

Post: https://oldskulltuning.com/moto-guzzi-e ... -tunerpro/

Image
Ralf013
Posts: 2
Joined: Mon Sep 04, 2023 6:12 am

Re: Moto Guzzi Marelli MIU G4 tuning using TunerPro XDF

Post by Ralf013 »

Thanks for this positive Information.
I take with me, that with the offered XDF, we can read the MIUG4 data from E5 Guzzis.

I have some questions to the experienced users:

Has anyone achieved already full access to the MIU G4 of a new V7 805 E5 yet?
If yes, which interface [from the connection to the OBD plug to a WIN10 driven PC] is needed?
Just an interface cable, or an additional FTDI driver as in ealier times?
OR even the additional ELM327 chip?
AND: Where do I get a suitable ADX file to read live data fromECU and make a LOG during driving?
Has anyone made changes in the MIUG4 mapping and wrote that successfuilly back to the ECU?
If yes, with which tool?

Thanks to all for your help and support!
Best regards from Germany
Ralf
Post Reply