BIN Stacker help

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
ED-NY
Posts: 9
Joined: Sat Oct 30, 2010 4:21 am
Location: NY

BIN Stacker help

Post by ED-NY »

Need to load a 16.0 KB bin on a 27SF512 (64.0 KB) prom...are basic instructions available using TP RT Bin Stacker?

Thanks
User avatar
dex
The Ford Guy
Posts: 612
Joined: Thu Oct 07, 2004 6:38 am

Re: BIN Stacker help

Post by dex »

See the 'Bin Stacker' section under the 'Index' tab of the Tunerpro help file.

If you do not want to stack binaries then see the 'AutoProm PROM I/O' section for the offset to use when programming.
ED-NY
Posts: 9
Joined: Sat Oct 30, 2010 4:21 am
Location: NY

Re: BIN Stacker help

Post by ED-NY »

Thanks for the reply..didn't realize there was that many help topics right inside TunerPro!

May sound like a dumb question...but wouldn't be easier to just use a 27C128 chip versus stacking a 27SF512?
ED-NY
Posts: 9
Joined: Sat Oct 30, 2010 4:21 am
Location: NY

Re: BIN Stacker help

Post by ED-NY »

BTW: The "bin stacker" demo screenshot in the instructions doesn't match the 5.0 release screenshot. Couple extra boxes....think I figured it out.
ED-NY
Posts: 9
Joined: Sat Oct 30, 2010 4:21 am
Location: NY

Re: BIN Stacker help

Post by ED-NY »

Are there instructions for using the Block E option? When do you check this block?
Attachments
stackerC.jpg
stackerC.jpg (66.19 KiB) Viewed 2130 times
Post Reply