Unable to edit Tables - Build 5.00.9290.00

Report bugs found in TunerPro. Please be sure to include as much info as possible, including system specs, OS, repro steps and TunerPro version number.

Moderators: Mangus, robertisaar, dex

Post Reply
wwhite
Posts: 8
Joined: Fri May 14, 2021 10:38 am

Unable to edit Tables - Build 5.00.9290.00

Post by wwhite »

For whatever reason, I am unable to edit or create any Tables.
No matter what, I always receive the 'Address out of bounds' error.

The only way I can edit XDF, is to do it manually.
I have 100% reformatted my computer, reinstalled windows10, updated, downloaded and installed TunerProRT from web, and same problem.
This error happens when I just want to change the name of a table or description, does not matter what I change, clicking OK or Apply says its out of bounds.
It even fails when table edit parameter xdf info, add a space in description, remove the space so nothing has changed, click apply or ok, and 'Address out of bounds'.
This only happens on Tables with fresh install of everything.
Build 5.00.9290.00 is the version I'm having an issue with.
Build 5.00.9209.00 works fine.
Tables - Address out of Bounds
Tables - Address out of Bounds
TunerProERROR.png (60.17 KiB) Viewed 4879 times
User avatar
Mangus
TunerPro Author
Posts: 1918
Joined: Wed Mar 19, 2003 1:49 pm

Re: Unable to edit Tables - Build 5.00.9290.00

Post by Mangus »

Thanks. Fixed in the next build. This only affects XDFs with a base offset set.
***************************************
TunerPro Author
1989 Trans Am
wwhite
Posts: 8
Joined: Fri May 14, 2021 10:38 am

Re: Unable to edit Tables - Build 5.00.9290.00

Post by wwhite »

Fixed in build 5.00.9332.00.
Verified working.

Thank you!!
845motorsports
Posts: 20
Joined: Sun Aug 14, 2016 12:07 pm

Re: Unable to edit Tables - Build 5.00.9290.00

Post by 845motorsports »

I am running into the same issue on the newest version?

i removed the base offset ( it was 0 so it wasn't doing anything anyways please help!~ haha thank you again for all your hard work I kept increasing the size and it still does it lol so i'm not sure what else to do
Attachments
tunerproissue.JPG
tunerproissue.JPG (74.65 KiB) Viewed 4525 times
User avatar
Mangus
TunerPro Author
Posts: 1918
Joined: Wed Mar 19, 2003 1:49 pm

Re: Unable to edit Tables - Build 5.00.9290.00

Post by Mangus »

how many rows and columns? multiply those together, multiply that result by 2 (since each is 2 bytes), and add it to the base address. If the result is the same as or larger than the bin size, then the error message is correct.
***************************************
TunerPro Author
1989 Trans Am
845motorsports
Posts: 20
Joined: Sun Aug 14, 2016 12:07 pm

Re: Unable to edit Tables - Build 5.00.9290.00

Post by 845motorsports »

unfortunately it's on anything and no matter how big i put the size as you can see in the SS i posted it was a 5x1 table that times 2 is 10 adding 10 to the base table address of 24DB60 is no where near the 32000 bin size. I believe the SS gives you all the info needed unfortunately it's not "correct" even a 1x1 on a brand new def with a size of 32000 gives the same error
User avatar
Mangus
TunerPro Author
Posts: 1918
Joined: Wed Mar 19, 2003 1:49 pm

Re: Unable to edit Tables - Build 5.00.9290.00

Post by Mangus »

Alright. Please email me the XDF and a bin file. I'll take a look.
***************************************
TunerPro Author
1989 Trans Am
845motorsports
Posts: 20
Joined: Sun Aug 14, 2016 12:07 pm

Re: Unable to edit Tables - Build 5.00.9290.00

Post by 845motorsports »

anddd i'm dumb LOL i just noticed it was 32000 instead of 320000 so technically it was under the amount listed ... my apologies i tried to recreate it from scratch and i was like well WTF lol
Post Reply