NEW BMW 506 xdf

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
evilm3666
Posts: 72
Joined: Wed Nov 09, 2011 4:31 pm

NEW BMW 506 xdf

Post by evilm3666 »

I just sent a updated xdf for the BMW 506 chip number 965
This has many updates from the one that is in the download section.
It has the launch control/2 step rev limiter, corrected the scalars for the speed limiter, found the table for the IAC (idle air control), found the tables for Closed loop ( what engine load and rpm it is enabled and disabled) just to name a few. I set up levels in the xdf so to see everything you need to make sure the tab on the top of tunerpro all the to the right is set to all levels. I also have found how to turn off the CEL on the dash for any codes,but have not found out how to disable the codes altogether. This is not included in the new xdf. If anyone has any info on how this is done please email me. If anyone needs a CEL light turned off you can email me your bin file. I have been getting a lot of questions about tuning for larger injectors and tuning for E85. So I wrote up some info about how to do this. I think I may just post it up here.
I also sent a updated xdf for the 413 red label also. Not many changes to it. I always suggest updating to the 506 bin if you can.

Also please make sure the xdf you are using matches the bin file. You can always find the bin file number under ''BMW chip number" This is the most common issue I hear.
Brian Shor
Posts: 28
Joined: Fri May 06, 2011 7:11 am

Post by Brian Shor »

Very good work evilm3666, many thanks especially from us keeping our E36 M running.
Brian Shor
Posts: 28
Joined: Fri May 06, 2011 7:11 am

Post by Brian Shor »

Evilm3666 can you please email me your updated xdf for the 506 chip 965. Send to: brian_shor@yahoo.com

Thanks
evilm3666
Posts: 72
Joined: Wed Nov 09, 2011 4:31 pm

Post by evilm3666 »

Files sent.
Brian Shor
Posts: 28
Joined: Fri May 06, 2011 7:11 am

Post by Brian Shor »

Thanks alot EvilM3666. The bin I did and sent you was with 29lb/hr injectors, stock S50B30US, 0.50front 0.63back, 10psi boost, pump gas, 344whp, 365lbft.
VRP
Posts: 2
Joined: Thu Apr 09, 2015 4:49 am

Post by VRP »

where is uploaded? can u send to saxoto@abv.bg
evilm3666
Posts: 72
Joined: Wed Nov 09, 2011 4:31 pm

Post by evilm3666 »

Looks like it has not been posted to the download section yet.
ticclint
Posts: 1
Joined: Thu Mar 02, 2017 1:22 pm

Post by ticclint »

Any chance you could shoot me one as well? - Clint@turninconcepts.com
evilm3666
Posts: 72
Joined: Wed Nov 09, 2011 4:31 pm

Post by evilm3666 »

files sent
M50BEAST
Posts: 1
Joined: Sat Jun 20, 2020 9:51 am

Re: NEW BMW 506 xdf

Post by M50BEAST »

Kindly send me the latest/most complete 506 xdf to - jodyvermeulen007@gmail.com. Thank you in advance :D
zarboz
Posts: 8
Joined: Mon Jan 28, 2019 12:41 pm

Re: NEW BMW 506 xdf

Post by zarboz »

can you please send me the newest 506 xdf sbtoonz@gmail.com
TheProctologist
Posts: 1
Joined: Mon Apr 26, 2021 1:43 pm

Re: NEW BMW 506 xdf

Post by TheProctologist »

Kindly send me the latest/most complete 506 xdf to Blondboy-emil@hotmail.com Thank you in advance :D
bomj911
Posts: 6
Joined: Tue Nov 28, 2017 3:38 pm

Re: NEW BMW 506 xdf

Post by bomj911 »

Can you shoot me one as well? thanks in advance. bomj911@hotmail.com
kuningas75
Posts: 1
Joined: Thu Aug 26, 2021 7:52 am

Re: NEW BMW 506 xdf

Post by kuningas75 »

Can you send me 413 and 506 updated xdf´s? ioannis.h@gmail.com
tnasslb
Posts: 1
Joined: Mon Aug 16, 2021 1:22 am

Re: NEW BMW 506 xdf

Post by tnasslb »

hello
plz can you send me xdfs and tuned bins for 413 , 402 , 403 , 405 , 406 , 179 dme .... tonynassar89tn.tn@gmail.com
Alexalx
Posts: 1
Joined: Wed Oct 20, 2021 1:48 pm

Re: NEW BMW 506 xdf

Post by Alexalx »

Please send me xdf 506 and 413 . If you have 075xdf m3 euro. Please send at noroc.alex@yahoo.it
saibex87
Posts: 1
Joined: Fri Jun 17, 2022 9:16 pm

Re: NEW BMW 506 xdf

Post by saibex87 »

can you please send me XDF files for 405 brains saibex87@gmail.com
bryce
Posts: 1
Joined: Thu Jan 26, 2023 3:02 pm

Re: NEW BMW 506 xdf

Post by bryce »

hi can i please have updated xdf for the 965 chip brycedow2349@gmail.com
thankyou
Student
Posts: 3
Joined: Wed Mar 16, 2022 5:03 am
Location: Moldova
Contact:

Re: NEW BMW 506 xdf

Post by Student »

share the updated 506 file with me. Here is my mail antosevkolia@gmail.com thanks in advance.
Adhamkhe
Posts: 35
Joined: Wed Mar 16, 2022 1:06 pm
Location: Lebanon
Contact:

Re: NEW BMW 506 xdf

Post by Adhamkhe »

The 506 xdf is updated on the tunerpro website. If there's a specific table that you need let me know and ill help as much as i can
Best regards

Adham al khechen
REVUP TUNING
Lebanon
Sinbad98
Posts: 2
Joined: Tue Mar 21, 2023 8:06 am

Re: NEW BMW 506 xdf

Post by Sinbad98 »

Hey, can someone send me evil's 506 bin and xdf? I want to use it for my red label 413.

I need every possible table, inclusive knock parameters.

Thank You :)
Lambda1
Posts: 21
Joined: Wed Jan 18, 2017 1:35 pm

Re: NEW BMW 506 xdf

Post by Lambda1 »

US M3 = silver label.
Red label = M50B25TU. Maps sometimes different. Basemaps you can find easily in M50B25TU by your own.
larguedas
Posts: 4
Joined: Wed Jul 05, 2023 10:48 am

Re: NEW BMW 506 xdf

Post by larguedas »

evilm3666 wrote: Thu Dec 29, 2016 10:12 am I just sent a updated xdf for the BMW 506 chip number 965
This has many updates from the one that is in the download section.
It has the launch control/2 step rev limiter, corrected the scalars for the speed limiter, found the table for the IAC (idle air control), found the tables for Closed loop ( what engine load and rpm it is enabled and disabled) just to name a few. I set up levels in the xdf so to see everything you need to make sure the tab on the top of tunerpro all the to the right is set to all levels. I also have found how to turn off the CEL on the dash for any codes,but have not found out how to disable the codes altogether. This is not included in the new xdf. If anyone has any info on how this is done please email me. If anyone needs a CEL light turned off you can email me your bin file. I have been getting a lot of questions about tuning for larger injectors and tuning for E85. So I wrote up some info about how to do this. I think I may just post it up here.
I also sent a updated xdf for the 413 red label also. Not many changes to it. I always suggest updating to the 506 bin if you can.

Also please make sure the xdf you are using matches the bin file. You can always find the bin file number under ''BMW chip number" This is the most common issue I hear.
Hi, I couldn't find this definition in the TunerPro downloads.
Could you help me with the .bin and .xdf?

my email is arguedas2322@gmail.com

It is to be used on a 143 red label.

thank you so much.

Pura vida :D
Post Reply