xdf for c20xe m2.5

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
taiajam
Posts: 37
Joined: Sun Aug 31, 2008 2:15 pm

xdf for c20xe m2.5

Post by taiajam »

is there a or does someone has a simple xdf for this engine with the motronic 2.5 ecu?

part throttle - fuel and ignition
and WOT fuel and ignition
would do.
taiajam
Posts: 37
Joined: Sun Aug 31, 2008 2:15 pm

Post by taiajam »

since there probably isnt 1, I would like to make my own xdf files so I can share and contribute.
But I've actually never did build a XDF file due to lack of knowledge (tried 1 time). I can locate some maps but i just dont know whats what. ofcourse there is a lack of experience... but some1 has to start somewhere.

obviously I want to make a XDF file for the motronic 2.5 ecu for the opel c20xe engine.

Im going to start on this tomorrow. some help would be needed and of course appreciated.


edited-----------------------------------------


ok so ive used winols to look at the hex data. and so far ive found some maps an put thos into tunerpro and made an xdf file.

how do i upload this? so people can chek it to see whats good of bad etc...
sjonv
Posts: 1
Joined: Thu Aug 15, 2013 9:25 pm

Post by sjonv »

hi,

i know this is old topic.

but i will do some test with same engine. have orderd ostrich 2.0 and will lett you know how it goes.

Have you some good results?


br johnny
t16_rally
Posts: 3
Joined: Wed Jan 28, 2015 5:02 am

Re: xdf for c20xe m2.5

Post by t16_rally »

No progress on this subject?
Post Reply