data for 95 s-10 need files

Discuss General Motors (GMC, Chevy, Pontiac, Hummer, Cadillac, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
jlsug
Posts: 4
Joined: Mon Mar 21, 2011 6:10 pm

data for 95 s-10 need files

Post by jlsug »

hi , i am looking for xdf and adx files for 1995 s-10 5spd, with 4.3 tbi it also has 16 pin dlc under dash. vcm is located under hood left side, also say obd1 on radiator support, thanks for any help. I like to see the sensor data, i trying to use tunerpro vf-5
User avatar
EagleMark
Posts: 424
Joined: Mon Mar 22, 2010 11:11 am

Post by EagleMark »

There's about 225 files here:
http://www.eagle-mark.com/Forums/
1990 Chevy Suburban
1994 Buick RoadMaSSter Estate Wagon LT1.
1972 IH 1210 Isky Cammed Balenced 345 TBI

GearHead-EFI.com EFI Conversions and Chip Tuners!
robertisaar
Author of Defs
Posts: 962
Joined: Sat Feb 21, 2009 3:18 pm
Location: Camden, MI

Post by robertisaar »

sounds like the blackbox VCM.... that's an early OBD2 PCM.
User avatar
EagleMark
Posts: 424
Joined: Mon Mar 22, 2010 11:11 am

Post by EagleMark »

robertisaar wrote:sounds like the blackbox VCM.... that's an early OBD2 PCM.
Oh.. under the hood, I think your right. I just saw the 95 TBI and thought it would be the 427 type.

So the black box is no good with TunerPro to see data anyway?
1990 Chevy Suburban
1994 Buick RoadMaSSter Estate Wagon LT1.
1972 IH 1210 Isky Cammed Balenced 345 TBI

GearHead-EFI.com EFI Conversions and Chip Tuners!
robertisaar
Author of Defs
Posts: 962
Joined: Sat Feb 21, 2009 3:18 pm
Location: Camden, MI

Post by robertisaar »

should be able to, using the ELM plugin that mark made, assuming you have an ELM based cable.
User avatar
EagleMark
Posts: 424
Joined: Mon Mar 22, 2010 11:11 am

Post by EagleMark »

Cool! didn't know that... links to useable cables please! :D
1990 Chevy Suburban
1994 Buick RoadMaSSter Estate Wagon LT1.
1972 IH 1210 Isky Cammed Balenced 345 TBI

GearHead-EFI.com EFI Conversions and Chip Tuners!
robertisaar
Author of Defs
Posts: 962
Joined: Sat Feb 21, 2009 3:18 pm
Location: Camden, MI

Post by robertisaar »

any REAL ELM327 cable should work, though a lot of companies have more or less attempted to make their own IC, since ELM charges a rather high price for theirs. some work well, some don't.

http://tunerpro.net/downloadPlugins.html
jlsug
Posts: 4
Joined: Mon Mar 21, 2011 6:10 pm

Post by jlsug »

robertisaar wrote:any REAL ELM327 cable should work, though a lot of companies have more or less attempted to make their own IC, since ELM charges a rather high price for theirs. some work well, some don't.

http://tunerpro.net/downloadPlugins.html
so will i still need a xdf and also ads with this elm327 to use tunerpro rt and yes it is vcm black box under the hood, but what throws me it say obd1 complaint on rad support. I also found data stream 192.ds file for this s-10, i do believe this is also a flash prom puter from gm. Also the pin location in the dlc are 4,5,6, 9, 16
jlsug
Posts: 4
Joined: Mon Mar 21, 2011 6:10 pm

Post by jlsug »

jlsug wrote:
robertisaar wrote:any REAL ELM327 cable should work, though a lot of companies have more or less attempted to make their own IC, since ELM charges a rather high price for theirs. some work well, some don't.

http://tunerpro.net/downloadPlugins.html
so will i still need a xdf and also ads with this elm327 to use tunerpro rt and yes it is vcm black box under the hood, but what throws me it say obd1 complaint on rad support. I also found data stream 192.ds file for this s-10, i do believe this is also a flash prom puter from gm. Also the pin location in the dlc are 4,5,6, 9, 16
bump
User avatar
honken
Posts: 111
Joined: Wed Dec 15, 2004 6:05 am
Location: sweden

Post by honken »

I have a elm 327 ver.1.5A its a low cost obd2 scanner (reads s10 95 and more cars with right program).
You can find a lot of free program on the net.
Post Reply