Newbie looking 4 3.4L V6 Camaro Bin file

[black34v6]

Newbie here...

Looking for any bin files for a 1993-1995 3.4L V6 Engine by which to get a baseline for tuning. cannot find ANYTHING out there and I don't know how to make bin files or I would have done one already.

Any help anyone can give is seriously appreciated.

Thanks.

-R

[robertisaar]

if you manage to find one, let me know.

the 93-95 camaro 3.4 PCMs are flash based units, much like the 94-95 LT1s and 93-95 3100s. there may be more, but they are all considered OBD1.5. so far, only the LT1 (and the 4.3 V8 based on the LT1) is tuneable.

if someone could get ahold of BINs, we could possibly hack through them and get them tuneable, but as is, they are useless for tuning.

if you need baselines for something like a 3.4 swap into something that had a 3.1 or 2.8, just use 3.1 iron head BINs for source information. they exist in the $88 mask.

[Neumaa26]

Was this ever resolved or did you have to use the 3.1 iron head bins? I just downloaded Tunerpro and picked up a ALDL for my 94 camaro and from reading through several forums it seems in vain. If PepBoys can reset my codes and look into my computer with a laptop and aldl cable then i know the programs are out there, they just have to be found.

[robertisaar]

i've been working with Madtuner (www.madtuner.com since i don't know if he's on these forums), he pounded out a program to flash/read tunes on the 93-95 V6 FLASH units, i've updated my tune roughly 20 times in the last ~45 days or so without issue.

[EagleMark]

Looks like the same program will flash 94 95 LT1 PSM as well. I wonder if the WinFlash I already have from TunerCat would have done the same thing? It was only $20...

[robertisaar]

the tunercat program DOES NOT work with the V6 PCMs.

the madtuner program does work rather well. both PROMs programmed in 2 minutes and 30 seconds on the V6 PCMs. never tried with the V8, but it should take 5 minutes for a full program with those.

[EagleMark]

When he adds Vortec and LS I'm all in for buying one!