tracing with ostrich2 & tunerpro

nicos78 · Post by **nicos78** » Tue Dec 08, 2009 11:12 am

hello

I have buying and installing tunerpro v5
I have buying ostrich2
today I have receiving ostrich2
I have starting tunerpro v5, my ostrich2 is good detecting
I have creating a file xdf with many table data
I would like to know :
Can I tracing multi table in real time ?
Can I tracing a totally file eprom in real time ?

I would like testing on my car this weekend, Can you help me please ...
Thanks

Post by **Mangus** » Tue Dec 08, 2009 12:22 pm

The ostrich can only watch a single address range at once. You can only trace one table at a time.

You can monitor hits for the entire bin (or a larger range) using the tools->address trace tool, but that tool is not easy to use and it does not really provide useful information.

nicos78 · Post by **nicos78** » Thu Dec 10, 2009 8:49 am

hello

I can't find "adress trace tools"
can you send a example (picture for example) please

starrd · Post by **starrd** » Fri Dec 11, 2009 7:09 pm

nicos78 wrote:hello

I can't find "adress trace tools"
can you send a example (picture for example) please

TunerProRT ver5
In tools => Address Hit Tracer ...
You need to have the emulator hooked up for it to work.

nicos78 · Post by **nicos78** » Sat Dec 12, 2009 11:29 pm

hello

I have making the first test with ostrich2 and tunerpro v5 onto my car
I don't understand all
I have charging a bin file onto emulator
when I connect the ostrich2 on eprom support, I can drive

when I connect the usb wire to my computer, I can see the pointer moving onto my table of xdf file
I can modify a bin file and upload emulator after cut off the engine and after restart, it's ok

But I don't know modify in real time the xdf file for that my calculator is modifing automatically also on real time ???

I think that tunerpro has 2 mode :
1 => physical emulator remplace the hard eprom
2 => file xdf remplace the hard eprom
It's exact ????

I have testing the hit tracing, and I have not understand, I have not see a modification on the windows hit tracing ????

revlimit · Post by **revlimit** » Tue Dec 15, 2009 10:36 pm

Here is the youtube video on how the tracing looks:
http://www.youtube.com/watch?v=8F2VjIFNID0

nicos78 · Post by **nicos78** » Wed Dec 16, 2009 10:10 am

thanks
but I have also seen the video

He adorned that he do : click to "ostrich => tunerpro" for modify in real time the table with immediatly effect of engine's working...

revlimit · Post by **revlimit** » Wed Dec 16, 2009 4:17 pm

nicos looks like you are using electronic translator from your original language to english. This is why your post is not understandable.

nicos78 · Post by **nicos78** » Thu Dec 17, 2009 12:05 pm

ok excuse for my poor english

I must do a new test with my ostrich and tunerpro v5
I have forget to click onto "emulator=>tunerpro" to load the xdf and to work in real time (modify table and see directly the effect on engine)