TunerPro User Forum

Hi gays need help about motronic ml4.1 xdf file.Where can i find it.

you can't

So i should make it my self?Or is there any other option?What are these file .ecu?Can i get the description from them?Can you light me up about this.I'am a little bit shoeless on this.I don't know how the motronic bin files are organized.Where can i find info about them?Sorry about these questions.I know they are a lot but i must get start from somewhere

Which car? Which year? Which engine?

The engine and the electrics are from opel omega a but the car is opel astra ,i just swap the motor from omega to astra.The omega was 1987.The ecu is motronic ml4.1 0 261 200 100 (FB).The engine is c20ne.

You have to make it yourself. But with the questions that you are asking makes me think you don't have knowledge to do it. It is very difficult to make it so maybe you should give up.

Thanks for the answer.Yes i did not know so much but at the start you were to.I should start from some where i have the basic.It was very difficult to repair the hole engine at 15 years on my old car.However looks like that here i cant find help.

I know where is some maps in this ECU, maybe I can help you

I appreciate your help man.I really need this.Or i will never complete my project.Here is some people that can help me but i don't trust them.So i decide to make it my self.I know it is hard to make it but i accept the challenge,or i will never learn how it is.)Thanks again.

0CB3- Spark idle 1 4x8
0CE3- spark idle 2 4x8
0D13 spark idle 3 4x8
1087 injection idle 4x8
10bf injetion WOT 1 4x16
1117 injection WOT 2 4x16
1173 lambda target1 12x12
121f lambda target 2 12x12
139e MAF pulsation 12x12
1DE0 MAF linarisation 256x1
17c1 Calculated throttle angle 12x12
0d45 spark WOT 16x1
0d67 spark wot 16x1
0d89 spark WOT 16x1
0dab spark WOT 16x1
0dcd spark WOT 16x1
0dfe spark WOT 16x1
0ec7 Spark part load 12x12
0e1b spark part load 12x12
0f73 spark part load 12x12
12cb injection part load 12x12
I don`t know where is rev limit and idle speed, maybe someone else help you

Thanks man.Thanks for the data.I will read some info what i found in the web and i'am sure that i will find the other 2.Thanks againg.

If you find tell me please

Of course i'll do it.I own you one.I realy appreciate your help.I found this site http://motronic.ws/.I dont know how much the guy can help me but there i can find the basics.Maybe i can try to find it on my own.

Can somebody give me the bin?
I have 3 0261200100 FB files but the don't match with these adresses.

I can tell where the rev-limiter and idle-speed is when i get the file.

(I hope that I'm not gravedigging this thread...)

You can get many opel motronic (M4.1 and M1.5 atleast) bins from there:
http://www.opelmoscow.ru/opelecu.htm

Not my site, no guarantees, but I think they could be atleast useful for digging of table positions.
Also, regarding rpm limit on M4.1, see:
http://motronic.ws/rpm.htm

Note that it could be in either of those formats (atleast I dunno).

OT:
I have an M1.5 (1990 Vectra-A C20NE), so you know of what I'm interested in, I'd be really happy if somebody could also look at the M1.5 (eg. C20NE 1990) binary and provide any data to help create a xdf file.

Hello! I'm looking .xdf file for Opel Omega 1987 C20NE Motronic ML4.1. Alfa code FB, Bosch 0 261 200 100. Can somebody help me? I'm beginner in chip tunning. I'm trying chip my own Omega.
Or say name of .xdf file.