As well as being able to set the baud rate, can you enable the ability to change the parity?
The ECU I'm working with uses "even" parity, and all tuner-pro or scanner-pro are capable of is "none" parity.
BTW, scanner-pro is capable of lower baud rates than the 2400 it states is the bottom limit. I logged the serial comm, and it is capable of setting the baud within 2 of my application. With the "even" parity it might be able to log it.
Thanks,
Dave
Baud rates..
Moderators: Mangus, robertisaar, dex
Re: Baud rates..
I've heard another similar request. I'll consider adding parity settings. If not, you'll be able to do it via your own plugin.uglykid wrote:As well as being able to set the baud rate, can you enable the ability to change the parity?
The ECU I'm working with uses "even" parity, and all tuner-pro or scanner-pro are capable of is "none" parity.
BTW, scanner-pro is capable of lower baud rates than the 2400 it states is the bottom limit. I logged the serial comm, and it is capable of setting the baud within 2 of my application. With the "even" parity it might be able to log it.
Thanks,
Dave
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am
Re: Baud rates..
Oh boy, oh boy.. (panting and wagging tail!!!)Mangus wrote:I've heard another similar request. I'll consider adding parity settings. If not, you'll be able to do it via your own plugin.