413 vs 506 bin knock Correction

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
Sinbad98
Posts: 2
Joined: Tue Mar 21, 2023 8:06 am

413 vs 506 bin knock Correction

Post by Sinbad98 »

Hi Guys,

I‘m new in tunerpro. I want to use the 506 bin on an 413 red Label. I don‘t know anything about how the knock correction on this ecu is working. Is the knock correction still working if I use the 506 bin on my 413 red label?

Tank You :)
olafu
Posts: 186
Joined: Tue Jul 26, 2016 12:35 pm
Location: Finland

Re: 413 vs 506 bin knock Correction

Post by olafu »

506 and 413 has differences in knock control parameters, because bore and stroke are different, but otherwise it's not a problem to mix these bins. Use 506 or 413 parameters depending on which engine you are using.
Post Reply