Can you let me know what kind of AFR you are targetting for WOT ?
At our side the engine was runing good at 12 for low boost (0.35 to 0.45 b) and request more than 11 to 10 with now 0.8 bars.
Witch revision of AUTOCOM do you use ?
We have the old round 20 pins diag plug, it's hard to find a software that didn't need a serial adaptator, we need to change our software.
I have inpa, that is running good on my M54b30 but not helpfull for the M50.
Now your car is running good.
You need to check the injector duty cycle to see how do you use your injectors, and where you are located on the scale of their limits.
Next step will be to avoid air leak on the inlet, step by step they will appear
![Smile :)](./images/smilies/icon_smile.gif)
thanks Olafu again and again
![Smile :)](./images/smilies/icon_smile.gif)
Your bless
![Smile :)](./images/smilies/icon_smile.gif)
I will cut my MAF maps in 2 smaller one to check that again.