I am using TunerPro for my buell 1125R 2008, and when I am reading the ECM, I get some errors on the pages 14 and 15 by the look of the logfile. Can anyone explain for me why this is happening and if there is something I can do to fix this?
I have not dared to do any tuning yet when not being sure it's fully working and not faulty.
This is from the logfile:
Serial Device: COM1
ECM Type: "BUEZD0P0 12-17-08"
Data will be written to file
"C:\Program Files\EcmRead_Mono\nytt\BUEZD0P0 12-17-08_20110824-203118.xpr"
Open serial device COM1.
Read type from ECM: "BUEZD0P0 12-17-08"
Close serial device COM1.
Open serial device COM1.
Read ECM: page 1 fully read.
(-Everything looks fine so far-)
Read ECM: page 13 (256 bytes) done.
SendRequest(): Error: response is not ACK: 0x15
SendRequest(): Error: invalid request/address error
SendRequest(): Error: response is not ACK: 0x15
SendRequest(): Error: invalid request/address error
Read ECM: premature end of page 14.
Read ECM: page 14 (44 bytes) done.
SendRequest(): Error: response is not ACK: 0x15
SendRequest(): Error: invalid request/address error
Read ECM: page 15 (0 bytes) done.
Read ECM: reading XData.
SendRequest(): Error: response is not ACK: 0x15
SendRequest(): Error: invalid request/address error
Read ECM: end of XData.
Read ECM: XData (40 bytes) done.
Close serial device COM1.
Read ECM: got EEPROM data (3412 bytes).
Thankfull for any input or help that I can get regarding this issue, I am a noob when it comes to tuning buell's

Best Regards, Lars R. Sweden