XDFs - who wants them?

Discuss General Motors (GMC, Chevy, Pontiac, Hummer, Cadillac, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
robertisaar
Author of Defs
Posts: 962
Joined: Sat Feb 21, 2009 3:18 pm
Location: Camden, MI

XDFs - who wants them?

Post by robertisaar »

much like my previous ADS/ADX thread, i might have some time on my hands in the future. if there are any GM masks that anyone either does not have a XDF for, or it feels incomplete, let me know and i'll see what i can do.
efid
Posts: 4
Joined: Wed Jan 06, 2010 8:52 pm

xdf

Post by efid »

Hi, do you have any xdf files for vs v6 and vtv6-v8?

Regards.
robertisaar
Author of Defs
Posts: 962
Joined: Sat Feb 21, 2009 3:18 pm
Location: Camden, MI

Post by robertisaar »

sounds like austrailian cars to me, what mask are they?
efid
Posts: 4
Joined: Wed Jan 06, 2010 8:52 pm

Post by efid »

Yes they are, I am after $51 for NA vehicles 3.8 v6 auto and man which is a VS Commodore and $A5 and $A6 for VT v6 and v8.

Regards.
robertisaar
Author of Defs
Posts: 962
Joined: Sat Feb 21, 2009 3:18 pm
Location: Camden, MI

Post by robertisaar »

i do have a $51 XDF and an $A5 XDF(though it's not very complete), but no A6... i'll see if i can dig anything up for that one, but no promises.
efid
Posts: 4
Joined: Wed Jan 06, 2010 8:52 pm

Post by efid »

Whatever you have will be greatly appreciated thanks.

Regards.
robertisaar
Author of Defs
Posts: 962
Joined: Sat Feb 21, 2009 3:18 pm
Location: Camden, MI

Post by robertisaar »

email?
efid
Posts: 4
Joined: Wed Jan 06, 2010 8:52 pm

Post by efid »

yoda69
Posts: 31
Joined: Wed Dec 09, 2009 1:06 pm
Location: Australia

Post by yoda69 »

I wouldn't mind a copy of anything you have either on $A5, $A6 and $51 either.
I've been doing a bit of work on the $A5/6 ones, there are a number of different variants of these as outlined in the posts below.
http://www.delcohacking.net/forums/view ... ?f=7&t=270
http://www.delcohacking.net/forums/view ... ?f=7&t=315

yoda_1969@hotmail.com

If anybody else has any info on these I would be interested to hear from you.

Thanks,
yoda69
robertisaar
Author of Defs
Posts: 962
Joined: Sat Feb 21, 2009 3:18 pm
Location: Camden, MI

Post by robertisaar »

that MAY be where i found the A5 and 51 XDFs i do have...
yoda69
Posts: 31
Joined: Wed Dec 09, 2009 1:06 pm
Location: Australia

Post by yoda69 »

Just be careful with the $A5 xdf's as there are 2 distinctly different ones.
There was one for a VP with 16K bin and then about 10 variants for the later model VT with a 128K bin.
The VP and VT ones are obviously completely different, and the VT ones are similar but with locations randomly offset throughout the calibration data. I have initially concentrated on the Variant C & F ones, but later just on the Variant F as it was becoming too much work to keep updating numerous xdf's every time i identified something new.

yoda69
Post Reply