TunerPro User Forum

JP86SS

Any luck duplicating this issue?

JP86SS

Crap, wrong computer!!
Updated the laptop, Downloading now. Sorry.

JP86SS

Mark, When adding a new gauge to the dash there is no default item selected. This causes a crah when reloaded/saved. Can you set it to default to the first item found for that particular gauge type? It would have to be looked up for the correct "type" during the first save in the dialog be...

JP86SS

Look at it now :) Kind of cool to put some indicators over others. Need to squeeze fans in there somewhere (Even though I don't have electric) I was going to put up some monitor shots too but they come out unreadable. The one marked FP Volts is set for TPS% but the text keeps displaying wrong until ...

JP86SS

Made this one.
[img]http://www.wideopenwest.com\~JohnandRuth\JP_DASH.jpg[/img]

JP86SS

Its an Intel 800 but only has 128 ram, 60 Gb drive (46 free), running serial cable with USB on the AutoProm. I changed to a fixed swapfile to see if that would help. Couple things I did find was that having 32 bit video was slowing me down allot. Changed to 16 bit and picked up a few hz. This machin...

JP86SS

JP86SS wrote:Just had a thought when reading the other post.
The "FFFFFFFF" offset in my definition for the Prom ID may be the whole problem.
Jp

Nope, didn't fix it.
I'll try the new version

JP86SS

I have had issues with the catergory selection bar "stealing" the focus. Trying to find the sequence that indicates when it will occur is not working out. Just seems like you can change them several time while editing and then it will just allow changes along that bar. Can not even close T...

JP86SS

Just had a thought when reading the other post.
The "FFFFFFFF" offset in my definition for the Prom ID may be the whole problem.
Could just be an import error from when I brought in my existing definition. Will test that theory tonight.
Jp

JP86SS

Mine seemed ok on logging/connection, just playback was giving me troubles. Connection speed was a bit slow at max of 4 hz but not sure if it was my 98 laptop causing it.
Will be playing some more tonight.

JP86SS

Been having loads of fun with this, I have made some notes on things to help when making definitions and such. If I state something incorrect, please let me know and I'll edit it in correctly. I don't want to fill this thread with "Things don't work" issues, just helpful hints from users t...

JP86SS

I'm running 1024 x 768.
I did forget to mention that due to syntax of the file it is best to create a new "dash" and then paste mine in.
The "item count" at the top may not like it if you do it by just pasting.

JP86SS

That DASH crash is due to when a new item was added there was no default item assigned to it. So when it loaded there was nothing there. I figured that out shortly after playing with the dash items. For the $8D guys that like to see everything, here's what I made tonight. Copy it in at the end of th...

JP86SS

Laptop w/ 98SE is no dice. Won't save a new file or edit at all. I'll just have to create/edit the definition on the 2K desktop and then try logging with 98. I'll let you know on the 98 issues. Might be time for the least common denominator here :) Wondering if anyone else has this issue or if its j...

JP86SS

OK, I did save as .. with new name etc. No "&" found. Restarting the system again tonight and it seems ok now. Saves and edits are taking effect on the 2K machine. Maybe it was just needing a reboot after install. XP machine didn't care, worked right away. I may not have done that in m...

JP86SS

Hi Mark, Thanks for giving us a new toy :) On my initial install on my 98SE laptop and on my 2K desktop, I'm not able to save any changes I make. Save as.. works but the file will not load, just ignored it seems. The importer doesn't doesn't seem to do anything. (Not a problem for me though). Files ...

JP86SS

I think that is the A148 datastream.
grab the "ALDL Stuff" file from Moates site and create one.
There was one floating around somewhere but I didn't find it in my quick search.

JP86SS

No problem, laptop just went into standby and lost its partition info.
Can't blame that on TP

, I'll blame gravity this time.
Doing a full reload probably tonight

I'll re-download just in case I have that debug version laying around.
Thanks,
Jp

JP86SS

After reloading, unloading drives for video, networks, comms and the reloading everything...again and again.
Its working fine today.

Still don't know what caused the whole thing to go buggy.
Maybe a conflict when installing the new version that I wasn't aware of.
Anyway, All is well.

JP86SS

I just installed the version on my desktop (Win2K) and it "seems" ok. I don't know what is going on with the 98 machine. Its basically useless at this point. Maybe I need an update... Were there any improvements that may have used a new ActiveX or other "new" type of control? Try...

JP86SS

No dice, still blank. When emulating and "update" is pressed, the value will appear for that item (If that helps to narrow it down) When switching catergories etc clears the screen, the value is not shown again. I also am getting "Error intializing graph" when attempting to load ...

JP86SS

I just installed the new version and I don't have any values displayed in the summary window (F7). They are there when clicked to edit and the compare is there too. Just all blank in the summary window except for the item labels. I'm on 98SE in case you didn't see the issue on another OS. Tried to i...

JP86SS

When setting a 16 bit constant and using "hex digits" as the type. If I open the item to edit there are only 3 digits. Should be 4 so I can set an address I want to load from for the ALDL word output. Right now I've broken them into LSB, MSB and edit that way using 8 bit. Works ok that way...

JP86SS

Had me ging in circles yesterday with that. I do see on the Moates board that the lables are reversed but it goes slightly deeper than that. (going by the terminal numbers) Channel 1 = 67-68 Channel 2 = 65-66 Channel 3 = 69-70 Got that working good but my mV readings for the channel don't seem right...

JP86SS

In the levels selection it would be nice to have a "show only" --->"always".
Difficult to sort out the items that aren't assigned levels yet.
Jp

JP86SS

When I log data the channels 1 and 3 "seem" reversed. Are those channel #'s confirmed to be correct? There is also a setup of the channels that appears on the display only view for these. They are listed as Channel 0, 1, 2 IIRC. Do those it interact with the ADS settings at all? JP Only r...

JP86SS

I think I have most of it figured out (for the WB anyway) Use 1024, YES. Use 15.04 AFR span/1024 counts = 0.0146875 +7.35 Gives 0-5 volt range of 7.35 to 22.39:1 AFR For doing an ECM input directly (8 bit) factor would be 0.05898039 +7.35 The Sim NB signal counts = (0.103 V = 21.09), (1.099 V = 225)...

JP86SS

I'm using the A/D channels on the extender and can't seem to get my head on straight with the settings to scale them correctly. I see in your example $6E ADS that you have them setup for 16 bit but with a 1024 maximum range? What would the counts/volt be for this? ( 5/1024= 0.0049 V per Count) or ( ...

JP86SS

Good place to start is the $40 hac from Moates file area. That is the 1228079 1987-88 CCC carb ECM. 2532 is a drop in PROM from what I've seen. The 1227169 (SS) has an ecu there somewhere as well, they are similar. Shoot me mail if you can't find it. Look in the Tuning guide at TGO Prom board for CC...

JP86SS

It doesn't "seem" to happen on my desktop running Win 2K Pro. Have tons of mem and space available on that machine. I don't do much with the AP on the desktop but I've brought it in the house a few times to pull out the latest emu session to compare the changes. Mostly the problems are on ...

JP86SS

Mangus wrote:The bit "Graphing" is easy. You can count on this for V5.

I figured the CSV would be trouble.
Bit graphing will be a nice option.
Thanks,
Jp

JP86SS

Is this looking possible for the next rev?
If not I understand, you stated it would not be a simple change.
Just wondering what your outlook on this was.

JP86SS

When I do a compare of a file with allot of code changes (or the differences are many) something just begins to lockup TP. Sometimes it is immediate but sometimes it is after I change an item value after comparing. Bin doesn't get saved at that point either. Restating and limiting to defined items h...

JP86SS

Oh darn!
Guess I'll learn to count better

JP86SS

Basically the numbers on the left. So they line up with a chip offset. Rather than the "viewed" addressing starting at $0000, there could be a way to implement it to see it start at $8000 (for an $8D bin, $C000...) Even if its just for viewing in the hex editor. Making the whole thing calc...

JP86SS

Quick suggestion, Is there a way you could allow the hex editor (or 2D, 3D advanced displays) to display addresses with an offset? Entry box for default starting value maybe. So starting at $8000 or $C000 could make counting/locating items easier. I'm still screwing up Hex counting finding the ends ...

JP86SS

If you have the ability to change code you could reassign the address that is being output to the datastream. Just locate an item you don't need to see and load a word from a memory location of your choice to that position.
I don't know much about the foreign stuff to know if it is possible yet.

JP86SS

I had an idea on that table issue that may work. What if you put in a "Y2" scale and allow that to be selectable. that may be what was suggested but in different terms. Maybe a "combine table" flag to use a second table data set to be displayed on the "Y2" while sharing...

JP86SS

Is there a quick way for you to implement printing from the Difference tool?
Would be nice to have hardcopies of differences between bins for documenting.
Thanks,
Jp

JP86SS

Hated to find another problem for you although seemed like an easy one to fix (hopefully)
I for one am glad you love your hobby.
Happy Holi..., Oh heck with it!

Merry Christmas!

JP86SS

When sorting by the "hex" column in the item summary list using 4.12.1751 I got a repeatable crash.
No data damage just shuts down and needs to be restarted. I'm running on Win2K Pro.

JP86SS

Exactly as you said it

There's some info in this thread as well if you would like to take a look.
The help file in TP is helpful as well as the "White papers"
The command strings are the things that you want to be sure are set right.

JP86SS

Obviously not, I always wondered what that button was for

Nice help file, Very complete.
Thanks,
Jp

JP86SS

I noticed that it didn't work on my 730 either and tried to make it function. I also was playing with other modes and didn't have any success there either. I am wondering if you could give a quick description on what the "check" box parameters are for in the editor and their usage. Checksu...

JP86SS

Its easy in TP to add an item to your ads file. Open the ALDL setup screen, browse for your existing ads file if its not already loaded. Then click the "edit ALDL definition" button. Select the "sensor" item above where you want to add it and click "insert". Give it a n...

JP86SS

Just another feature suggestion :) When reviewing my logs I found it very useful to rescale the min/max in the ads definition to get better resolution on the replays. I keep forgetting to put them back when I'm done so I now have multiple files setup for viewing logs with speed, rpm and other item s...

JP86SS

Buffer address range was incorrect by default.
Should be 07FFFF (not 007FFF)

Knew it was something simple just didn't see it.
At least that's an easy one to fix for a change

JP86SS

When saving a "read" of of an 29F040 chip, "save buffer to file" only writes 32768. The buffer has the whole file, just doesn't write it all out.
Went back to ver 310 to see if it existed there and it wrote the full stacked bin OK.
Probly something simple.

JP86SS

While creating my $8D XDF it occurred to me that if there was a way to identify "advancd" user items from the commonly tweaked items it would keep new users from changing things that do nothing but cause problems. Items such as filter coefficients that an advanced tuner may use could be hi...

JP86SS

I'm at a loss. STD 1 bar for my XDF.
I can't come up with a conversion formula for a MAP sensor value.
There are several I've found but all seem to be off.
anybody got it handy?

TunerPro User Forum

Search found 218 matches

Default gauge selection

Having fun with this

Win98SE Focus stuck in catergory bar

Things to help new users

Save 98SE & 2K issue

I'm insane!!!!, Its just my laptop again

IDK ???

New Version 4.140024

HEX BUG ?

Show up to..

Re: Scaling the Moates A/D

LC-1 Scaling Values

Scaling the Moates A/D

V5 ?

Compare Diffs Issue

Hex Editor offset

Thought

Print Diff's

Anyway...

Sort by hex crash

Clear Codes

edit

Adjustable Monitor scales

Found it

Moates I/O issue

DXF List Filters

MAP conversion