TunerPro User Forum

It is the 16196395.
But I could solve the problem yesterday, I burned the eprom again , put it in and have connection again!
Btw. TP is the only programm I could connect to this ecu up to now. Not winaldl or others

yesterday I have mounted TP on an other Laptop and tried connecting again. I have two usb aldl cables None works.They are recogniced "cable found and functioning" but the display stays on connecting with errors.I switched the Interface type to moates and tried to connect again.Now the disp...

Hi,
i can not get connection to my ecu.
Could the last windows update cause this.
When I check the converter I get answer "cable found and fubctioning" what else can I check?
I have already hocked TP up to an other ECM, same fault.

Hello, you will find most of help in the help section of tunerpro-rt and in that forum : http://www.gearhead-efi.com/Fuel-Injection/forum.php

Which droplist to you speak of? I find the lookup tables only in edit adx.Thought i would see them when playing a log-file like dash, history and so on!
Can you post picture?

Hi, I have configured a lookup table and have linked it to coolant temp.The "help" says I can see it on pressing the conversion tab.Where or what is that.
Can you show that on a picture please.

After dowloading ads, you must not load definition file but "Acquisition/import Definition/ from ads-file!"
After saving to adx you may load from adx next time.

after having more problems in tunerpro-rt i re-intalled the programm and now everything seems to work. But viewing comments you have to open the comments window and then doubleclick the parameter. (for beginners like me)

i have read the thread about parameter comments at gearheadefi-forum.But i think that thread was for the old version.In tunerpro rt i find the button for parameter comments. But when i activate this, the opened windows stays empty. When i hover with the mouse over the parameters the comments are sho...

Ok, i could manage it myself. To explain it for other newbies. 1. load desired adx-file 2.within acqisition choose edit definition 3.extend commands 4. when you have a command with extension macro open this 5. enable "while not monitoring " 6. click " save" Now the listbox is pop...

Can you explain that in detail? I have found nothing about macros in the help.From my understanding, I have clear dtc in my adx file.This command exists out of four single commands (0xF4 0x56 0x0A 0xAC ) so "clear dtc" should be a macro.But this is not shown in the listbox in front of send...

Hello, iwant to send commands. Ihave found "view,toolbars,tools" and the send button is viewed. But the list view with commands stays empty.How can i populate this view with my commands out of the adx-file? bin, xdf and adx are loaded but tunerpro is not connected to the car. Do i have to ...

I know all these sites but nowhere you can find the maker of the chip.
After a lot of trial and error I could finaly download the bin.The chip was a Philips 27c512
Thank you for your assistance.

I would do that but I have the xgpro TL866IIPlus Programmer and this wants to know the exact type (firm and type) of the eprom. So I thaugt I read bin with tunerpro and then programm it on a SSt 27SF512 ,that way I have it in spare and can play on the eraseable 27sf512. I can't find the maker of the...

[quote="dex"]You need to provide a little more information such as the ECU's BCC, its mask ID and the hardware you are using to interface with the ECU.[/quote] interface is usb ttl with fdti, i have tried masks $0E and $06 and BJBB and BPSA chip, bJBB is from 6cyl chevy astro while PBSA is...

hello, i'm new to tunerpro and have problem with dowloading bin file from emc.i work with win 10 and a usb ttl cable.I can connect to the emc ,its a 16196395 ,but when i try to download bin from emc i get checksum error."One or more checksums could not be updated.Check checksum addresing,etc, f...