TunerPro User Forum

thanks ;) will buy binary editor and GHAJ0 strategy file... yes it has license keys....USB dongles...etc.. but its not very expensive... Thats all true. But still i bought TunerPro RT Registration back in time and thats my opinion what is better in my mind in earlier told reasons. Maybe the time th...

thanks :D I found binary editor with full GHAJ0 strategy...XDF for GHAJ0 doesnt exist for now :( Ah.. okay then. Dex = sailorbob and he had full definition done for those. But as you told now then no XDF for TunerPro sadly. I checked back then Binary Editor too but wasn't pleased with it like with ...

I am alive! Still.. :wink: good job mate ;) but misssing some tables inside xdfs... can you make good XDF for "ANTI" catch code? GHAJ0 strategy? thanks Only GSAZ1.xdf was updated containing all what i did found.. others were no as no one asked and i then didn't bothered then use time to th...

Hi, Problem solved, now you can download the files, I'll ask to tvrfan for some indications, thanks I think that you can emulate those eproms in your sierra EECIV if have a MAP and DOHC motor, I have emulated the 1988 8BAC on 1992 2GGA without problems, if you can share your Sierra's BIN's I would ...

I have done some work on 92-98 ECUs (Escort, Mondeo..)

http://tunerpro.net/forum/viewtopic.php?t=3325

Now haven't done anything as i moved to 5 cylinder Volvo after little problems in other things.

Ford been rusting away... sorry

Edit. Oh.. it was so old post already.. haha

That just don't tell much of what to offer for you. You could locate yours ECU Catch code it would be helpful. I am not person what you are looking for but keep searching other forums. http://i108.photobucket.com/albums/n16/sxztec/0f72_1.jpg eectuning.org is one and there is popsracing example as on...

The W2E1 uses EFI-MA35G hardware, hence my doubt about it using the same strategy as the LAG0 ecu. As example SMO-270 (3AAB) uses same strategy than SME-105 (ENVY) and SME-101 (ACHE) uses same than SME-401 (SEAL)... I don't think its up to Module Type what strategy it uses in Europeans at least. Ju...

Hi, Problem solved, now you can download the files, I'll ask to tvrfan for some indications, thanks I think that you can emulate those eproms in your sierra EECIV if have a MAP and DOHC motor, I have emulated the 1988 8BAC on 1992 2GGA without problems, if you can share your Sierra's BIN's I would ...

Hi from Spain, Time ago I made an Andrew's EECSucka and a J3 Adapter with my PCB design and with a hard searching with TunerPro I found some tables in 2D and 3D, I made some changes in these tables and I could see that all working properly emulating the 27C512 with Ostrich from Moates. But the prob...

Can you redefine your question?


P.S. Can i ask about Cosworth.. what color?

I think yes. But you still need make Definition for your EEC-V and a bin out of it.

I know this is probably a very elementary question for the more experienced users however how do you know what is 8k worth of padding. Is there a book or other material out there to learn all this? eectech98.pdf This is good up to disassembly. I am not best to tell how to but this is my try as now ...

Is there a paper or thread on how to get started with Ford tuning (or maybe binary tuning). I do a lot of stand alone and OBDII however haven't played with OBDI much. I have an A9L engine in a 40 Ford to do. I have Moates hardware as well as TunerPro RT and EEC Editor. I downloaded the A9L bin and ...

Hello Has anybody the bin (and xdf) file for L8 ecu at level 1 ( engine is stock !). I don't know if these are standard with closed loop or not. Mine has already closed loop for the moment but i want to road map the fuel table it a bit. It is running to rich at light cruise ( 13 afr) . Rest is fine...

Hello, Help please.... Thx Hi jok, I am not anything familiar what you are doing but i'll try help by advising for what i can find. First of all.. you have different problem than who started this thread because yours simply won't work on any TunerPRO version? Little thing; Do you have stock bin or ...

Hi! *.BIN back online.. uniqueid="0x1112" - If you think there is my error but it was me after this happened. Trying different things. But i did come over this by little rebuilding after all and not trying move things by copy&pasting (functions or Tables) inside TunerPro program. It ha...

Sorry to hijack thread but same kind of problem. How i would be able now make flag this way: Normally byte is C7 which means Off. 10 Means On. If i try to make "Mask" Mask is too big to be added and i end up to incorrect values when "Set" has been Enabled and wrong On value when ...

Hello, I have this problem AGAIN so i am now asking this whats wrong. I'll explain via pictures because i am lazy. (Last time i rebuild definition file but i wanna know whats wrong.. i ended up this when i copy&pasted because i wanted change order of those functions and it messed things again) I...

Hello, I have been building definition file for my (European) Ford Escort Special -94 which has Zetec engine... ECU's Catch Code is ENVY ( EEC-IV ). I think strategy for this Definition is called " GSAZ1 ". I have in my mind to build more definition files about Zetec engines. Next will be ...