Search found 1875 matches

by Mangus
Fri Nov 04, 2022 4:40 pm
Forum: Report A Bug
Topic: TunerPro Refusing to open
Replies: 2
Views: 215

Re: TunerPro Refusing to open

No idea why this would be. Shot in the dark: with TunerPro closed, delete the .dat files in documents\tunerpro files\. Then try opening.
by Mangus
Mon Oct 31, 2022 8:25 am
Forum: Report A Bug
Topic: Tables become hardly editable after comparing bins in the latest Tunerpro
Replies: 1
Views: 69

Re: Tables become hardly editable after comparing bins in the latest Tunerpro

This is fixed for the next build, along with the issue in the other thread, as a result of the same change.
by Mangus
Sun Oct 30, 2022 12:44 pm
Forum: Report A Bug
Topic: Connection Problems
Replies: 8
Views: 734

Re: Connection Problems

I've gone through all of the changes related to hardware detection between 9209 and the latest, and I don't see any change that would obviously cause this. I did add support for a couple of new pieces of hardware (meaning adding new checks of 3rd byte in the hardware version response). It sounds lik...
by Mangus
Thu Oct 27, 2022 7:59 pm
Forum: Report A Bug
Topic: Connection Problems
Replies: 8
Views: 734

Re: Connection Problems

When nothing is attached to your Toughbook, how many COM ports show up in device manager?

When you go back to an earlier build of TunerPro, does it work again?

Hit Ctrl + Alt + Shift + D to open the debug window, then hit the connect button and show me what you see for a failure.
by Mangus
Wed Oct 26, 2022 3:44 pm
Forum: Report A Bug
Topic: Table color changes to transparent after Table compare switching
Replies: 5
Views: 172

Re: Table color changes to transparent after Table compare switching

I see why I couldn't reproduce this - it only affects tables that don't use internally defined axes. Of course I was trying to make it happen with tables that have internally defined axes.

Fixed for the next build. Thanks!
by Mangus
Wed Oct 26, 2022 12:06 pm
Forum: Report A Bug
Topic: Table color changes to transparent after Table compare switching
Replies: 5
Views: 172

Re: Table color changes to transparent after Table compare switching

Can you outline what steps you're taking to reproduce this? I still haven't been able to make it happen, strangely.
by Mangus
Fri Oct 21, 2022 1:48 pm
Forum: Feature Suggestions
Topic: Hotkey for the 'Update' button in emulation mode?
Replies: 2
Views: 396

Re: Hotkey for the 'Update' button in emulation mode?

Thanks for the feedback. Ctrl + Shift + S should do it. You can reassign this in preferences.

The selected cell address is already shown in the toolbar. Seems like that could be used for lookup up the table/location in the hac/source.
by Mangus
Wed Oct 19, 2022 9:00 am
Forum: Report A Bug
Topic: Changing table values using + / - keys does not register a change
Replies: 1
Views: 352

Re: Changing table values using + / - keys does not register a change

This seems to be working in the latest build.
by Mangus
Wed Oct 19, 2022 8:59 am
Forum: Report A Bug
Topic: Table color changes to transparent after Table compare switching
Replies: 5
Views: 172

Re: Table color changes to transparent after Table compare switching

Thanks. I haven't been able to reproduce this. I'm not sure how it would work differently per machine, or even per XDF. Do you see this with more than one XDF? Perhaps you could email me the XDF and the two bins?
by Mangus
Sun Oct 09, 2022 7:07 pm
Forum: Report A Bug
Topic: Display issue with category
Replies: 1
Views: 431

Re: Display issue with category

Can you email me the XDF that shows this issue?
by Mangus
Thu Sep 01, 2022 2:03 pm
Forum: Feature Suggestions
Topic: Reordering XDF Items in Parameter Category view
Replies: 2
Views: 392

Re: Reordering XDF Items in Parameter Category view

Thanks! Will add it to the list.
by Mangus
Thu Sep 01, 2022 2:02 pm
Forum: Feature Suggestions
Topic: Key shortcuts not working?
Replies: 2
Views: 394

Re: Key shortcuts not working?

This works fine for me. I'm not sure what to suggest, other than to try it in the next release. =(
by Mangus
Thu Sep 01, 2022 8:28 am
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 10
Views: 14200

Re: Datastream failures / Realterm shows perfect

Can you send me ADX and XDL (log) files with instructions on how to reproduce some of these issues (example: the playback speed issue)?
by Mangus
Thu Sep 01, 2022 8:25 am
Forum: Report A Bug
Topic: Connection Problems
Replies: 8
Views: 734

Re: Connection Problems

Without the MAFTPro connected, do you see any com ports in device manager?

I wonder if there's another device attached as a COM port.
by Mangus
Thu Jul 14, 2022 8:57 am
Forum: TunerPro Discussion
Topic: Universal data logging
Replies: 2
Views: 298

Re: Universal data logging

The data logging plug-in for TunerPro was built for generic serial logging. You could certainly create an ADX to communicate with whatever serial protocol you implement on the Arduino.
by Mangus
Tue Jun 14, 2022 8:09 pm
Forum: TunerPro Discussion
Topic: Open multiple TunerPro instances
Replies: 3
Views: 539

Re: Open multiple TunerPro instances

I believe it's under the "Tools" tab. I haven't looked at TPRT in a couple months. That was it, found it. Thanks! Kind of silly that it's buried in a menu rather than just be able to launch another copy, but now that I know where it is, no big deal. It's this way because launching multipl...
by Mangus
Tue Jun 14, 2022 8:07 pm
Forum: Report A Bug
Topic: Connection Problems
Replies: 8
Views: 734

Re: Connection Problems

Where are you seeing others having communication issues? I don't believe I've touched any code at all that would cause the issue you're reporting below, but I'll take a closer look.
by Mangus
Tue Jun 14, 2022 8:06 pm
Forum: Report A Bug
Topic: Floating Point Data Type doesn't work
Replies: 2
Views: 520

Re: Floating Point Data Type doesn't work

I'll have to look back through my logs. That's a previously-known issue that I thought was fixed. I'll take a look.
by Mangus
Wed Jun 01, 2022 11:42 am
Forum: Feature Suggestions
Topic: Add a button in ADX file
Replies: 1
Views: 520

Re: Add a button in ADX file

I like the idea. Thanks!
by Mangus
Tue May 24, 2022 12:52 pm
Forum: TunerPro Discussion
Topic: Possible to create a table to change individual bits?
Replies: 3
Views: 607

Re: Possible to create a table to change individual bits?

The request is on my radar, thanks!
by Mangus
Tue Feb 15, 2022 12:25 pm
Forum: Feature Suggestions
Topic: Mark/Flag/Highlight Favorite maps in XDF
Replies: 1
Views: 863

Re: Mark/Flag/Highlight Favorite maps in XDF

Thanks for the suggestion. Apologies for the delay in acknowledging. Note that you could add a "Favorites" category and assign items to that category. One challenge here is that favorites would likely be saved with the XDF, but your favorites may not be everyone's favorites.
by Mangus
Tue Feb 15, 2022 12:07 pm
Forum: Feature Suggestions
Topic: Bar gauge to dashboard?
Replies: 1
Views: 1623

Re: Bar gauge to dashboard?

Thanks for the suggestion. This has been on my long list of things to add.
by Mangus
Tue Feb 15, 2022 11:05 am
Forum: Feature Suggestions
Topic: Dashboard Analogue Gauge Properties addition
Replies: 1
Views: 8146

Re: Dashboard Analogue Gauge Properties addition

Thanks for the suggestion!
by Mangus
Tue Feb 15, 2022 11:01 am
Forum: Feature Suggestions
Topic: More flags/switches in one byte?
Replies: 3
Views: 1506

Re: More flags/switches in one byte?

Thanks for the suggestion. Sorry for the late acknowledgment.
by Mangus
Tue Feb 15, 2022 10:58 am
Forum: Feature Suggestions
Topic: The ability to set axis conversion per cell or at least set patterns
Replies: 1
Views: 848

Re: The ability to set axis conversion per cell or at least set patterns

Thanks for the suggestion. Seems like a rare need, for which you have a solution. At the point where you're entering conversions for each cell, it's not much extra in overhead to simply create a table to link. The next build will allow you to double click an axis value to open up a linked table for ...
by Mangus
Tue Feb 15, 2022 10:56 am
Forum: Feature Suggestions
Topic: saving log files
Replies: 2
Views: 611

Re: saving log files

Thanks for the suggestion.
by Mangus
Tue Feb 15, 2022 10:55 am
Forum: Feature Suggestions
Topic: Ability to rename Visibility levels
Replies: 1
Views: 411

Re: Ability to rename Visibility levels

That's a reasonable suggestion. I don't get the impression that visibility levels are widely used.
by Mangus
Tue Feb 15, 2022 10:54 am
Forum: Feature Suggestions
Topic: Axis Labels that work on 3d maps
Replies: 1
Views: 637

Re: Axis Labels that work on 3d maps

Thanks! I used to have a "legend" window for tables that showed axis units, but it was rarely used. Will consider something for the future.
by Mangus
Tue Feb 15, 2022 10:52 am
Forum: Feature Suggestions
Topic: Add the ability to display a hex value as binary
Replies: 1
Views: 821

Re: Add the ability to display a hex value as binary

It's a good suggestion. Meanwhile, you can view bytes as binary in the hex editor (Ctrl + H)
by Mangus
Tue Feb 15, 2022 10:13 am
Forum: Feature Suggestions
Topic: Edit axis easily / preset default axis numbers
Replies: 15
Views: 10410

Re: Edit axis easily / preset default axis numbers

Direct axis editing will be in the next build, along with sync groups (data linking, as I think you're calling it - e.g. keeping per-cylinder tables that you want to have identical values in sync).
by Mangus
Sat Feb 05, 2022 9:33 pm
Forum: Report A Bug
Topic: Ctrl+T does not save XDF
Replies: 1
Views: 591

Re: Ctrl+T does not save XDF

Thanks. I'll fix this. Meanwhile, you can assign whatever shortcut(s) you want in the preferences->Keyboard tab.
by Mangus
Sat Feb 05, 2022 9:31 pm
Forum: Report A Bug
Topic: TunerPro crashed in select XDF
Replies: 1
Views: 409

Re: TunerPro crashed in select XDF

Does it do this after selecting the XDF? If so, does it happen when you select a different XDF? If so, send me the problematic XDF.
by Mangus
Sat Feb 05, 2022 9:30 pm
Forum: Report A Bug
Topic: Slow table copying? Why?
Replies: 1
Views: 394

Re: Slow table copying? Why?

Because it's a bug. It's fixed in the latest build.
by Mangus
Sat Feb 05, 2022 9:29 pm
Forum: Report A Bug
Topic: Copying Entire Table Contents Freezes TP
Replies: 4
Views: 511

Re: Copying Entire Table Contents Freezes TP

This should be resolved in the latest build. The issue came up as a result of adding auto-coloring of table cells. I've since optimized the behavior.
by Mangus
Tue Nov 30, 2021 7:49 am
Forum: Report A Bug
Topic: Shutdown after changing number of rows
Replies: 4
Views: 903

Re: Shutdown after changing number of rows

Hello. Thanks for reporting this. Please email me the XDF and the list of steps to reproduce and I'll get it fixed.
by Mangus
Thu Sep 02, 2021 6:55 pm
Forum: Report A Bug
Topic: Missing .dll
Replies: 1
Views: 1274

Re: Missing .dll

What OS are you running? Sounds like the VS2019 runtime isn't installed correctly. This gets installed automatically during TunerPro install, but I've heard of instances of it not working on earlier OS's (like Win7).
by Mangus
Thu Sep 02, 2021 6:54 pm
Forum: Report A Bug
Topic: What Mswindows software is required to use TunerPro ?
Replies: 1
Views: 596

Re: What Mswindows software is required to use TunerPro ?

Acknowledging. We're working on this in email. Win7 should work, but it sounds like the VS2019 runtime isn't installing correctly on your Win7 instance.
by Mangus
Thu Sep 02, 2021 6:53 pm
Forum: Report A Bug
Topic: Shutdown after changing number of rows
Replies: 4
Views: 903

Re: Shutdown after changing number of rows

Hi Rich,

I'm just acknowledging your report and confirming that we're working on this via email.

-M
by Mangus
Thu Sep 02, 2021 6:52 pm
Forum: Report A Bug
Topic: Unable to edit Tables - Build 5.00.9290.00
Replies: 7
Views: 1937

Re: Unable to edit Tables - Build 5.00.9290.00

Alright. Please email me the XDF and a bin file. I'll take a look.
by Mangus
Wed Aug 04, 2021 6:39 pm
Forum: Feature Suggestions
Topic: Edit axis easily / preset default axis numbers
Replies: 15
Views: 10410

Re: Edit axis easily / preset default axis numbers

I hear you guys on the quick ability to edit axis definitions. It's on the short list.
by Mangus
Wed Aug 04, 2021 6:38 pm
Forum: Report A Bug
Topic: Unable to edit Tables - Build 5.00.9290.00
Replies: 7
Views: 1937

Re: Unable to edit Tables - Build 5.00.9290.00

how many rows and columns? multiply those together, multiply that result by 2 (since each is 2 bytes), and add it to the base address. If the result is the same as or larger than the bin size, then the error message is correct.
by Mangus
Tue May 18, 2021 1:20 pm
Forum: Report A Bug
Topic: Dash, Monitor, List display
Replies: 5
Views: 7336

Re: Dash, Monitor, List display

You can nuke the settings and start over by closing TunerPro, deleting the .dat files in "documents\tunerpro files\" folder, then restart TunerPro.
by Mangus
Tue May 18, 2021 1:19 pm
Forum: Report A Bug
Topic: Unable to edit Tables - Build 5.00.9290.00
Replies: 7
Views: 1937

Re: Unable to edit Tables - Build 5.00.9290.00

Thanks. Fixed in the next build. This only affects XDFs with a base offset set.
by Mangus
Mon Nov 23, 2020 11:12 am
Forum: Report A Bug
Topic: Categories 256-300
Replies: 4
Views: 6581

Re: Categories 256-300

I've fixed the originally-reported issue (categories over 255 not being saved correctly) for the next build. Thanks!
by Mangus
Tue Jun 23, 2020 8:22 pm
Forum: Report A Bug
Topic: tunerpro wont open
Replies: 8
Views: 14822

Re: tunerpro wont open

Although it's installed with the TunerPro installer, some systems might fail this step, so you should try installing the Visual Studio 2017 redistributable manually. Here's the link: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads If you're running a 32-bit O...
by Mangus
Mon Dec 09, 2019 11:29 am
Forum: Report A Bug
Topic: Categories 256-300
Replies: 4
Views: 6581

Re: Categories 256-300

Thanks for the report. I'll investigate and fix.
by Mangus
Tue Aug 13, 2019 9:53 am
Forum: Report A Bug
Topic: Dash, Monitor, List display
Replies: 5
Views: 7336

Re: Dash, Monitor, List display

See the "Dock/Undock" and "Floating Utility Tabs" options in the view menu. If all else fails, reset your settings by deleting the three ".dat" files in the "Documents\TunerPro Files\" directory.

-M
by Mangus
Tue Jun 25, 2019 8:23 pm
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 10
Views: 14200

Re: Datastream failures / Realterm shows perfect

Haven't been able to reliably reproduce it.