TunerPro User Forum

Any updates on this?
I have been away for a bit, and need to log my WB information.

Thank you,

Julian

Can you update me when you have a fix for this? I would like to be able to see this in my LOGS.

Thank you,

Mark,

Would you like me to email you a log file with the ADX
I am using?

yes, that is correct. I see the WB data during while logging data, but not during playback of the log file.

I put an offset of 10 in the formula and it worked. I set my low to 0 and high to 100 to scale the gauge.

I need some help with this in the 42 adx file and V5 I know the conversion is 0.392157. I have tried this, but the lowest percentage I get is 11.8 at .59 volts. not sure what is going on. I have a range of -15.38 to 115.38. I have the conversion set at X*0.392157 Please help, I want to be able to se...

Does anyone know? I would think, this would play back with the log file? Just like everything else?

go to tools> Moates PROM I/O

Once this is open, load the bin to the buffer, then save to a file.

How do I get channels 1, 2, and 3 on my APU to record in the data log?
I have my WB on channel 1. BYTE 20. When I play back my log, the value for the WB just stays at a constant value of 11.4 .

Six_Shooter wrote:Could be a definition issue, could also be checksum disabling not being used.

You need to change the mask byte to AA to disable checksum and allow real time tuning.

Can you tell me how I do this in TPV5?

Could be a definition issue, could also be checksum disabling not being used. You need to change the mask byte to AA to disable checksum and allow real time tuning. IS this the reason why, if I turn the key off after emulating and real time tuning, I have to re upload the bin to the autoprom. If i ...

I got this to work on byte 21 on channel one in TPv4. I cannot get this to ouput anything in V5? Very confused.

It is working now, must of been a definition issue.
I think I had the wrong definition selected.

I went into the ALDL definition and renamed the Byte to 65, 67, and 69. The readout on the ALDL values for the WB AFR never changed from 10???

I have my LC-1 WB setup and wired just as the picture in this thread

Confused again. http://tunerpro.net/forum/viewtopic.php?t=2081

Great, it all makes sense now.

The 42 ads file already has the ALDL definition set up in it. I will just change the byte from 65 to 67, and this should show my wideband in the ALDL Values.

Thanks for all your help.

This is all new to me. I am catching on though.

Can this be done in tuner pro 4?
how do I go from ADS definitions in 4 to ADX definitions in 5?

I have TP4 and TP5 both loaded in my machine, but I have not used TP5 because I do not know how to get the ADX def files.

I have the wide band hooked into channel 1 of the Autoprom. I have gone into "AUTOPROM A/D data interface" Is there where I would see the Wide band information, if I enter all the set up information or do I edit the ALDL definition. I have the 42 definition XDF file, and it already has the...

JP,

I am going in circles.

Channel 1 = 67-68
Channel 2 = 65-66
Channel 3 = 69-70

What are these channel numbers referring to?

I have an LC-1 and I would like to see it on my ALDL dash. Is this possible?

I am having issues with my Autoprom and tuner pro. I am running a GM 7747 computer. When I make changes to the autoprom during emulation, the computer SES light starts flashing rapidly. Is this normal? I thought that this meant the computer has gone into limp mode? If I make changes to the BIN and u...

How do I set up TunerproRT to show me the WB signal?
Is it already in the 42 definition? how do I assign the Channel 1 signal coming from the autoprom to show up on the ALDL values?

Is the autoprom capable of hit/map tracing?