Search found 27 matches

by mmd8x28
Mon Sep 27, 2010 3:41 pm
Forum: TunerPro Discussion
Topic: Glitchy Datalogging
Replies: 14
Views: 22913

robertisaar wrote:you wouldn't even need the engine running, just the key rolled forward as if you were about to start it....
True, though I haven't slept in 3 days, I really need to just get some sleep.. I'll post back first thing in the morning..
by mmd8x28
Mon Sep 27, 2010 3:18 pm
Forum: TunerPro Discussion
Topic: Glitchy Datalogging
Replies: 14
Views: 22913

Ok took a few times looking over the UI to figure it out.. It's just a tad confusing compared to Datamaster..

I'll try tomorrow morning, everyones asleep here and I doubt people want to hear an LT1 warm up for no reason.
by mmd8x28
Mon Sep 27, 2010 3:02 pm
Forum: TunerPro Discussion
Topic: Glitchy Datalogging
Replies: 14
Views: 22913

The only listen command that shows up is "Listen for Chatter".. There's no listen for silence.
by mmd8x28
Mon Sep 27, 2010 2:20 pm
Forum: TunerPro Discussion
Topic: Glitchy Datalogging
Replies: 14
Views: 22913

robertisaar wrote:that's due to it being adjusted in the ADX.

which mask is this?
It's just the $EE mask from the tunerpros main site, with temp adjustments you told me about in another thread (which work great, propper engine temp now)...
by mmd8x28
Mon Sep 27, 2010 1:55 pm
Forum: TunerPro Discussion
Topic: Glitchy Datalogging
Replies: 14
Views: 22913

robertisaar wrote:you need to add a slight delay in your monitor macro. somewhere in the area of 20-25 mS works for most people.
How do I do this? In the area that the COM settings can be set, it doesn't give much except select a port and if it's sharing an emulator (which it's not), that's all.
by mmd8x28
Mon Sep 27, 2010 8:31 am
Forum: TunerPro Discussion
Topic: Glitchy Datalogging
Replies: 14
Views: 22913

Glitchy Datalogging

Fresh install of Datamaster.. I tried reinstalling twice, and it's the same result.. http://www.youtube.com/watch?v=-5bouPKyr24 It used to work fine before I had to reinstall my laptop.. Using same drivers, same cable, same PCM, same car, same laptop, nothing has really changed except a different ve...
by mmd8x28
Thu Aug 12, 2010 1:20 pm
Forum: TunerPro Discussion
Topic: TunerPro and VirtualBox
Replies: 3
Views: 7901

http://www.youtube.com/watch?v=dCAhyUQQfNc

It's just SOOOO close to working.. I just need to find out how to improve VirtualBoxes USB capturing, and this problem will go away..
by mmd8x28
Thu Aug 12, 2010 12:33 pm
Forum: TunerPro Discussion
Topic: TunerPro and VirtualBox
Replies: 3
Views: 7901

Tuner Pro does not work with Linux. I'm aware of that.. :roll: That's why I'm asking if it will work in VirtualBox.. lol Virtualbox is a virtualization program that lets you boot Windows and other OS's within any other OS host.. In my case, I installed XP "in" Linux via VirtualBox. Virtua...
by mmd8x28
Thu Aug 12, 2010 7:38 am
Forum: TunerPro Discussion
Topic: TunerPro and VirtualBox
Replies: 3
Views: 7901

TunerPro and VirtualBox

Sun (now Oracle) VirtualBox, and TunerProRT. Will it work? I don't use Windows anymore and use only Linux...

Also, if it does work, think CATS WinFlash for my 94 LT1 PCM will work too, or is that asking for trouble?
by mmd8x28
Wed Aug 11, 2010 5:00 pm
Forum: General Motors
Topic: $EE temps wrong
Replies: 4
Views: 9132

Awesome, thanks...
by mmd8x28
Wed Aug 11, 2010 4:07 pm
Forum: General Motors
Topic: $EE temps wrong
Replies: 4
Views: 9132

robertisaar wrote:auto or manual ADX? i'm sure it's just a botched conversion.
Auto..
by mmd8x28
Wed Aug 11, 2010 1:28 pm
Forum: General Motors
Topic: $EE temps wrong
Replies: 4
Views: 9132

$EE temps wrong

Coolant temperatures on the $EE definition are drastically wrong.. This is the def from the main tunerpro site.. It always shows my temp very high like 220F when in reality the sensor and PCM are actually showing only 190.. I verified this with TTS Datamaster, and my Auto-X Ray with it's operational...
by mmd8x28
Mon May 24, 2010 2:04 pm
Forum: General Motors
Topic: Would like a $EEb Def Please
Replies: 2
Views: 6495

Would like a $EEb Def Please

I am unable to work on a $EEb PCM due to no definition being available for this.

With the EE.xdf, cylinder size shows up as 0, and injectors like 700 and something lbs.. Clearly incompatible with the $EEb PCM...

Can this be fixed? Tunercats has had this for a long time now..
by mmd8x28
Sat Mar 20, 2010 10:15 am
Forum: TunerPro Discussion
Topic: IO.SYS Error
Replies: 8
Views: 35140

This definitely suggests a driver issue. In V4, this was a driver issue for the prominator. That functionality has been completely removed. Perhaps this is an issue with your adapter? Have gone to the ftdi website (ftdichip.com) and downloaded and installed the latest driver (if you're sure that it...
by mmd8x28
Sat Mar 20, 2010 9:44 am
Forum: TunerPro Discussion
Topic: IO.SYS Error
Replies: 8
Views: 35140

Yes I am sure. http://img.photobucket.com/albums/v395/Evilweredragon/error.png I was using a previous TunerPro 5 build, I can't remember it's version number but the setup is from 2009 and it's 3.59MB (the installer), and when I upgraded to the newer build, this showed up. But since the newer build a...
by mmd8x28
Wed Mar 10, 2010 6:20 pm
Forum: TunerPro Discussion
Topic: IO.SYS Error
Replies: 8
Views: 35140

Help would be great. This is the ONLY TunerPro that worked on my car as my $EE PCM is not capable of being read on version 4.
by mmd8x28
Sun Mar 07, 2010 7:57 am
Forum: TunerPro Discussion
Topic: IO.SYS Error
Replies: 8
Views: 35140

IO.SYS Error

When loading TunerPro 5 Beta since updating from the previous beta build, I get this error and can't log..

IO.DLL
Unable to start the IO.SYS service. Error code = 1275
by mmd8x28
Thu Jan 07, 2010 9:26 am
Forum: General Motors
Topic: Who Needs An ADS or ADX?
Replies: 390
Views: 1665426

by mmd8x28
Thu Jan 07, 2010 9:15 am
Forum: General Motors
Topic: Who Needs An ADS or ADX?
Replies: 390
Views: 1665426

But there's only 35 items in the list. And keeping it as ADS on the older Tunerpro RT 4 has the same problem too..
by mmd8x28
Wed Jan 06, 2010 1:54 pm
Forum: General Motors
Topic: Who Needs An ADS or ADX?
Replies: 390
Views: 1665426

Then why is it I only get the following codes to see?

http://img.photobucket.com/albums/v395/ ... /codes.png

I don't see anything else.
by mmd8x28
Wed Jan 06, 2010 3:16 am
Forum: General Motors
Topic: Who Needs An ADS or ADX?
Replies: 390
Views: 1665426

I'll have to try the DA2 file. On the DA3 file, only the left 02 showed up in item list, that was it..
by mmd8x28
Mon Jan 04, 2010 5:36 pm
Forum: General Motors
Topic: Who Needs An ADS or ADX?
Replies: 390
Views: 1665426

Well, trouble codes are incomplete. It shows a code for left 02, but not right 02. It also doesn't have code 26, which is actually set on the ECM, but the definition doesn't seem to have it. For mine, EE, no trouble codes are set at all with the file from tunerpro definitions download page, despite ...
by mmd8x28
Mon Jan 04, 2010 2:38 pm
Forum: General Motors
Topic: Who Needs An ADS or ADX?
Replies: 390
Views: 1665426

Correct (automatic if it matters). Sorry I didn't specify it clearer, my bad, quite tired right now, haha.. I have a B-Body right now and it seems EE Auto doesn't have any trouble codes (as my code 43 doesn't even show up in TunerPro RT or ScannerPro..) But I'm possibly getting an F-Body and trying ...
by mmd8x28
Mon Jan 04, 2010 1:23 pm
Forum: General Motors
Topic: Who Needs An ADS or ADX?
Replies: 390
Views: 1665426

If possible, I'd like to see an updated $DA3 definition file.. It doesn't appear to read trouble codes correctly, and it's very limited on trouble codes..

ADX format too, I use tunerpro RT 5 beta..
by mmd8x28
Fri Jan 01, 2010 1:06 pm
Forum: General Motors
Topic: What is MAP Measurement?
Replies: 2
Views: 7348

What is MAP Measurement?

For the 93 LT1 definition file, DA3, is the MAP in KPA? It doesn't say like when I do my car, which is EE.
by mmd8x28
Mon Dec 21, 2009 1:52 pm
Forum: General Motors
Topic: 94 Caprice L99
Replies: 3
Views: 8339

robertisaar wrote:that uses the same ADX as the automatic LT1 cars.
It'll work despite being a smaller displacement and having 2 knock sensors vs 1?
by mmd8x28
Mon Dec 21, 2009 8:09 am
Forum: General Motors
Topic: 94 Caprice L99
Replies: 3
Views: 8339

94 Caprice L99

I would like to have a definition file for my L99 94 Caprice Classic LS.. L99 is the 4.3L version of the LT1, and being a B-body, has two knock sensors instead of 1 that an F-body has..

I wish to datalog my Caprice when my cable arrives.