Search found 17 matches

by grimmechanic
Sat Jan 29, 2022 6:53 pm
Forum: Other Motorcycle Makes
Topic: KTM TPI Continental Synerject M3C
Replies: 21
Views: 10425

Re: KTM TPI Continental Synerject M3C

Here's the Continental M3C module for the Bitbox application: https://www.remaptools.com/product-category/software-tools/bitedit/extreme-vehicles/ And a J2534 adapter: http://www.dashlogic.com/dashbridge_cx Should be all anyone needs to reflash the TPi Husky's and KTM's. Should work with some Ducati...
by grimmechanic
Sat Jan 29, 2022 6:38 pm
Forum: General Tuning Discussion
Topic: Hardware and software options to read/write .bin files
Replies: 10
Views: 5414

Re: Hardware and software options to read/write .bin files

No comments from anyone yet? I'm just getting started....
by grimmechanic
Sat Jan 29, 2022 6:36 pm
Forum: General Tuning Discussion
Topic: Hardware and software options to read/write .bin files
Replies: 10
Views: 5414

Re: Hardware and software options to read/write .bin files

And these guys seem to have taken over the openecu.org project. A lot of coverage for Subaru and Mitsubishi vehicles with a free/open source tuning application and their own J2534 interface:

https://www.tactrix.com/
by grimmechanic
Sat Jan 29, 2022 6:33 pm
Forum: General Tuning Discussion
Topic: Hardware and software options to read/write .bin files
Replies: 10
Views: 5414

Re: Hardware and software options to read/write .bin files

A variety of OEM level products, hardware and software:

https://intrepidcs.com/
by grimmechanic
Sat Jan 29, 2022 6:24 pm
Forum: General Tuning Discussion
Topic: Hardware and software options to read/write .bin files
Replies: 10
Views: 5414

Re: Hardware and software options to read/write .bin files

Decompiler, debugger, and reverse engineering software...

WinOLS is a common application for reverse engineering .bin files:
https://www.evc.de/en/download/

Free and low cost versions here:
https://hex-rays.com/IDA-pro/

And another:
https://ghidra-sre.org/
by grimmechanic
Sat Jan 29, 2022 10:34 am
Forum: General Tuning Discussion
Topic: I can't get my laptop to connect with the ECM
Replies: 4
Views: 3960

Re: I can't get my laptop to connect with the ECM

Well, if you haven't figured this out by now, I will share a new problem that's cropped up with Windows 10 recently. Apparently this was brought about by a security patch for Windows 10. I have a HP Tuner with the User Defined Parameter option upgrade, and a RaceMe/Warp Tuning setup for my Dodge die...
by grimmechanic
Sat Jan 29, 2022 10:20 am
Forum: General Tuning Discussion
Topic: Hardware and software options to read/write .bin files
Replies: 10
Views: 5414

Re: Hardware and software options to read/write .bin files

So, looks like there's some other hardware/software options. I haven't downloaded any of this software to play with it yet, but soon...

Pass-through devices:
http://www.dashlogic.com/products/j2534

Software:
http://www.dashlogic.com/downloads
by grimmechanic
Sat Jan 29, 2022 7:38 am
Forum: General Tuning Discussion
Topic: Hardware and software options to read/write .bin files
Replies: 10
Views: 5414

Hardware and software options to read/write .bin files

So, I know there's a lot of options as far as read/write hardware and software, and a lot of it depends on what you're working on. Right now, I have a Continental M3C ECU that I need to read and write .bin files. Looks like my only "off the shelf" option is sold by Bitbox and using a J2534...
by grimmechanic
Thu Jan 27, 2022 8:13 pm
Forum: Other Motorcycle Makes
Topic: KTM TPI Continental Synerject M3C
Replies: 21
Views: 10425

Re: KTM TPI Continental Synerject M3C

I believe this should be the correct cable: https://www.amazon.com/gp/product/B07Z6QSD2L/ref=ox_sc_act_title_2?smid=A16Z04TPX4IDWD&psc=1 And, If I'm not mistaken, a ELM327 based pass through device from any reputable seller should work between the OBD2 adapter cable and computer. If I'm wrong, s...
by grimmechanic
Thu Jan 27, 2022 8:02 pm
Forum: Other Motorcycle Makes
Topic: KTM TPI Continental Synerject M3C
Replies: 21
Views: 10425

Re: KTM TPI Continental Synerject M3C

I have a 2020 TE150i. I'm waiting for my adapter cable to show up. I have a pass-through on the way from http://obd2allinone.com/. I also got the .bin and .xdf files from oldskull. As soon as I get everything together, I need to pull the stock tune off the bike and see if it's any different. I'll be...
by grimmechanic
Thu Jan 27, 2022 7:41 pm
Forum: TunerPro Discussion
Topic: Which version of Windows?
Replies: 1
Views: 2179

Re: Which version of Windows?

W7 isn't supported anymore by Microsoft. Windows 8 and 8.1 suck. Windows 10 is probably what you want to use, and in a computer that isn't more than 10 years old. If you are loading your own OS on your computer, Get windows 10 Pro or Enterprise editions.
by grimmechanic
Thu Jan 27, 2022 7:37 pm
Forum: TunerPro Discussion
Topic: Laptop options
Replies: 1
Views: 2888

Re: Laptop options

Any Dell laptop. The Dell Precision M6600 is a great laptop and you can pick them up on eBay for reasonable prices. But they are BIG (if you like a full size keyboard and big screen). I have one setup on a docking station with two monitors and run SolidWorks CAD application on it. If you want someth...
by grimmechanic
Thu Jan 27, 2022 6:23 pm
Forum: TunerPro Discussion
Topic: Complete newbie. Hardware required? Vehicle compatibility?
Replies: 2
Views: 4664

Re: Complete newbie. Hardware required? Vehicle compatibility?

Ok. I'm gonna bump this since it's only a year old... I've read though the TunerPro users guide and understand it... mostly. The one part that's a bit ambiguous is how to extract a stock, OEM .bin file from an an installed ECU assuming it uses the standard OBD2 interface. I have a pass through devic...