i want to add some items to my XDF relating to this post,
http://www.thirdgen.org/techboard/diy-p ... -aujp.html
i believe these are all flags/switches i want to add.
if i understand right, this is what i do for each of these items.
first i want to select insert new XDF item, next create a new flag/switch & give it a name such as TCC Coast Unlock, TCC Coast Unlock 1 & 2.
for 7E i give it the address of 610f & give it the bit number of 7.
now for E1, address of 6110 & bit 0.
lastly A2 would be 6111, bit 1.
is this right or am i doing it wrong?
adding XDF items, 7730, 8D, AUJP
Moderators: robertisaar, dex
It looks like you want to add three constants with hexidecimal as the output type, with the following addresses:
0x610F
0x6110
0x6111
To make the mod, change all three to 0. To set them back, set the first to 7E, second to E1, third to A2.
0x610F
0x6110
0x6111
To make the mod, change all three to 0. To set them back, set the first to 7E, second to E1, third to A2.
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am