Twin maf for twin turbo setup?

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
User avatar
RaimoHal
Posts: 13
Joined: Tue Apr 08, 2014 12:22 pm

Twin maf for twin turbo setup?

Post by RaimoHal »

Hey whats up guys!

So its obvious that the stock M50 3" maf has its limits, so i was thinking about using two maf sensors for cheap-ish twin turbo setup. The MAF(x2) would be before turbos and bypass valve would be used to recirculate the air back before turbo/after MAF. The problem is figuring the new maf table. I dont think just multiplying the values 2x would work. So i wanted to ask your ideas. :wink:

The ecu would be 413 and the MAF signal wires would be connected together or trough two diodes (if its needed?).

Turbos should be good for 250hp*2 = ~500ish/HP.

So yeah, let me know what you think.
Raimo
Post Reply